Some Qualcomm X1E laptops have only two speakers. Regardless whether this sound card driver is suitable for them (we could re-use one for some older SoC), we should set reasonable channel map depending on the number of channels, not always 4-speaker setup.
This change is necessary for bringing audio support on Lenovo Thinkpad T14s with Qualcomm X1E78100 and only two speakers.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- sound/soc/qcom/x1e80100.c | 40 ++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-)
diff --git a/sound/soc/qcom/x1e80100.c b/sound/soc/qcom/x1e80100.c index 898b5c26bf1e..8eb57fc12f0d 100644 --- a/sound/soc/qcom/x1e80100.c +++ b/sound/soc/qcom/x1e80100.c @@ -95,23 +95,53 @@ static int x1e80100_snd_hw_params(struct snd_pcm_substream *substream, return qcom_snd_sdw_hw_params(substream, params, &data->sruntime[cpu_dai->id]); }
+static int x1e80100_snd_hw_map_channels(unsigned int *ch_map, int num) +{ + switch (num) { + case 1: + ch_map[0] = PCM_CHANNEL_FC; + break; + case 2: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + break; + case 3: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + ch_map[2] = PCM_CHANNEL_FC; + break; + case 4: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_LB; + ch_map[2] = PCM_CHANNEL_FR; + ch_map[3] = PCM_CHANNEL_RB; + break; + default: + return -EINVAL; + } + + return 0; +} + static int x1e80100_snd_prepare(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; - const unsigned int rx_slot[4] = { PCM_CHANNEL_FL, - PCM_CHANNEL_LB, - PCM_CHANNEL_FR, - PCM_CHANNEL_RB }; + unsigned int channels = substream->runtime->channels; + unsigned int rx_slot[4]; int ret;
switch (cpu_dai->id) { case WSA_CODEC_DMA_RX_0: case WSA_CODEC_DMA_RX_1: + ret = x1e80100_snd_hw_map_channels(rx_slot, channels); + if (ret) + return ret; + ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL, - ARRAY_SIZE(rx_slot), rx_slot); + channels, rx_slot); if (ret) return ret; break;