After calling clk_prepare_enable(), clk_disable_unprepare() need be called when calling clk_set_rate() failed.
Fixes: 0bf750f4cbe1 ("ASoC: hisilicon: Add hi6210 i2s audio driver") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- sound/soc/hisilicon/hi6210-i2s.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/sound/soc/hisilicon/hi6210-i2s.c b/sound/soc/hisilicon/hi6210-i2s.c index 907f5f1f7b44..ff05b9779e4b 100644 --- a/sound/soc/hisilicon/hi6210-i2s.c +++ b/sound/soc/hisilicon/hi6210-i2s.c @@ -102,18 +102,15 @@ static int hi6210_i2s_startup(struct snd_pcm_substream *substream,
for (n = 0; n < i2s->clocks; n++) { ret = clk_prepare_enable(i2s->clk[n]); - if (ret) { - while (n--) - clk_disable_unprepare(i2s->clk[n]); - return ret; - } + if (ret) + goto err_unprepare_clk; }
ret = clk_set_rate(i2s->clk[CLK_I2S_BASE], 49152000); if (ret) { dev_err(i2s->dev, "%s: setting 49.152MHz base rate failed %d\n", __func__, ret); - return ret; + goto err_unprepare_clk; }
/* enable clock before frequency division */ @@ -165,6 +162,11 @@ static int hi6210_i2s_startup(struct snd_pcm_substream *substream, hi6210_write_reg(i2s, HII2S_SW_RST_N, val);
return 0; + +err_unprepare_clk: + while (n--) + clk_disable_unprepare(i2s->clk[n]); + return ret; }
static void hi6210_i2s_shutdown(struct snd_pcm_substream *substream,