On Fri, Mar 16, 2012 at 4:56 AM, Shawn Guo shawn.guo@linaro.org wrote:
+Required properties: +- compatible : "fsl,imx-audio-sgtl5000" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller +- audio-codec : The phandle of the SGTL5000 audio codec +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer
+Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual.
+Example:
+sound {
- compatible = "fsl,imx51-babbage-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx51-babbage-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&sgtl5000>;
- mux-int-port = <1>;
- mux-ext-port = <3>;
+};
What would the device node look like for the ESAI controller? I've got a board here based on an iMX53 with two of three SSI controllers and the ESAI controller in use. It used the nullcodec codec driver for SSI and ESAI. The ESAI driver was since replaced with an entirely new custom driver that doesn't use ASoC at all. But ignoring that detail, what would the sound node(s) look like for some hardware that isn't so simple? It seems like there would be three sound nodes, but what would compatible and model be set to? I'm having a hard time seeing how "fsl,imx-audio-sgtl5000" would be changed into something for either SSI or ESAI.