Hi Pierre
Thanks for your review .
I changed the patch and explain the review comments as below
(Maybe the mail format has problem, sent from one new system thunderbird :)
On 3/23/21 2:57 PM, Pierre-Louis Bossart wrote:
Minor comments below.
On 3/22/21 4:38 AM, Perry Yuan wrote:
From: Perry Yuan perry_yuan@dell.com
add support for Dell privacy driver for the Dell units equipped hardware privacy design, which protect users privacy of audio and camera from hardware level. Once the audio or camera privacy mode activated, any applications will not get any audio or video stream when user pressed ctrl+F4 hotkey, audio privacy mode will be enabled, micmute led will be also changed accordingly The micmute led is fully controlled by hardware & EC(embedded controller) and camera mute hotkey is Ctrl+F9. Currently design only emmits
typo: emits
fixed
SW_CAMERA_LENS_COVER event while the camera lens shutter will be changed by EC & hw(hadware) control
typo: hardware
fixed
*The flow is like this:
- User presses key. HW does stuff with this key (timeout timer is
started) 2) WMI event is emitted from BIOS to kernel 3) WMI event is received by dell-privacy 4) KEY_MICMUTE emitted from dell-privacy 5) Userland picks up key and modifies kcontrol for SW mute 6) Codec kernel driver catches and calls ledtrig_audio_set, like this: ledtrig_audio_set(LED_AUDIO_MICMUTE, rt715->micmute_led ? LED_ON :LED_OFF); 7) If "LED" is set to on dell-privacy notifies EC, and timeout is cancelled, HW mic mute activated.
what happens if there is timeout? You have an explicit description of the timer handling in the success case, but not what happens on a timeout...
add more explicit description for timeout triggered case
7) If "LED" is set to on dell-privacy notifies EC, and timeout is cancelled.
HW mic mute activated. If EC not notified,HW mic mute will also be
activated when timeout used up, it is just later than active ack
diff --git a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi new file mode 100644 index 000000000000..20c15a51ec38 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi @@ -0,0 +1,32 @@ +What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/devices_supported +Date: Feb 2021 +KernelVersion: 5.12
5.13 now?
changed to 5.13
+static int dell_privacy_micmute_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct privacy_acpi_priv *priv = privacy_acpi; + acpi_status status; + acpi_handle handle; + static char *acpi_method = (char *)"ECAK";
+ handle = ec_get_handle(); + if (!handle) + return -EIO; + if (!acpi_has_method(handle, acpi_method)) + return -EIO; + status = acpi_evaluate_object(handle, acpi_method, NULL, NULL); + if (ACPI_FAILURE(status)) { + dev_err(priv->dev, "Error setting privacy EC ack value: %s\n", + acpi_format_exception(status)); + return -EIO; + } + pr_debug("set dell privacy micmute ec ack event done\n");
can we use dev_dbg() here? Same for all occurrences of pr_debug and pr_err below, it's cleaner and easier to filter.
I changed some pr_xx to dev_xxx , but below code will be more complex to use dev_xxx to print the
log , because it need to get the priv->dev, but it is not registered at this time , I would prefer to keep use the pr_debug here. and some other cases where "priv->dev" cannot be used.
static int __init init_dell_privacy(void)
{ int ret;
ret = wmi_has_guid(DELL_PRIVACY_GUID); if (!ret) { privacy_valid = -ENODEV; pr_debug("Unable to detect available Dell privacy devices: %d\n", ret); return privacy_valid; }
+ return 0; +}
+static int dell_privacy_acpi_remove(struct platform_device *pdev) +{ + struct privacy_acpi_priv *priv = dev_get_drvdata(privacy_acpi->dev);
+ led_classdev_unregister(&priv->cdev);
+ return 0; +} +/*
- Pressing the mute key activates a time delayed circuit to
physically cut
- off the mute. The LED is in the same circuit, so it reflects the
true
- state of the HW mute. The reason for the EC "ack" is so that
software
- can first invoke a SW mute before the HW circuit is cut off.
Without SW
- cutting this off first does not affect the time delayed muting or
status
- of the LED but there is a possibility of a "popping" noise.
- If the EC receives the SW ack, the circuit will be activated
before the
- delay completed.
- Exposing as an LED device allows the codec drivers notification
path to
- EC ACK to work
- */
+static int dell_privacy_leds_setup(struct device *dev) +{ + struct privacy_acpi_priv *priv = dev_get_drvdata(dev); + int ret = 0;
useless init
Sorry, I do not get this point .
int should be needed to return error code if devm_led_classdev_register failed.
+ priv->cdev.name = "dell-privacy::micmute"; + priv->cdev.max_brightness = 1; + priv->cdev.brightness_set_blocking = dell_privacy_micmute_led_set; + priv->cdev.default_trigger = "audio-micmute"; + priv->cdev.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE); + ret = devm_led_classdev_register(dev, &priv->cdev); + if (ret) + return ret; + return 0; +}
+static int dell_privacy_acpi_probe(struct platform_device *pdev) +{ + int ret;
+ platform_set_drvdata(pdev, privacy_acpi); + privacy_acpi->dev = &pdev->dev; + privacy_acpi->platform_device = pdev;
+ ret = dell_privacy_leds_setup(&pdev->dev); + if (ret) + return -EIO;
any reason to hard-code -EIO, woud 'return ret' be enough?
fixed to use return ret
+ return 0; +}
+static struct platform_driver dell_privacy_platform_drv = { + .driver = { + .name = PRIVACY_PLATFORM_NAME, + }, + .probe = dell_privacy_acpi_probe, + .remove = dell_privacy_acpi_remove, +};
+int __init dell_privacy_acpi_init(void)
is the __init necessary? You call this routine from another which already has this qualifier.
Yes, I need to add this when driver loading and kernel will free __init section mem after driver registered.
+{ + int err; + struct platform_device *pdev;
+ if (!wmi_has_guid(DELL_PRIVACY_GUID)) + return -ENODEV;
+ privacy_acpi = kzalloc(sizeof(*privacy_acpi), GFP_KERNEL); + if (!privacy_acpi) + return -ENOMEM;
+ err = platform_driver_register(&dell_privacy_platform_drv); + if (err) + goto pdrv_err;
+ pdev = platform_device_register_simple( + PRIVACY_PLATFORM_NAME, PLATFORM_DEVID_NONE, NULL, 0); + if (IS_ERR(pdev)) { + err = PTR_ERR(pdev); + goto pdev_err; + }
+ return 0;
+pdev_err: + platform_device_unregister(pdev); +pdrv_err: + kfree(privacy_acpi); + return err; +}
+void __exit dell_privacy_acpi_exit(void)
is the __exit required here?
same reason as __init
+{ + struct platform_device *pdev = to_platform_device(privacy_acpi->dev);
+ platform_device_unregister(pdev); + platform_driver_unregister(&dell_privacy_platform_drv); + kfree(privacy_acpi); +}
+MODULE_AUTHOR("Perry Yuan perry_yuan@dell.com"); +MODULE_DESCRIPTION("DELL Privacy ACPI Driver"); +MODULE_LICENSE("GPL");