From: Russell Parker russell.parker7@gmail.com
Factor out the common enable and disable sequences used in rt5645 variants, including the rt5650. Move the sequences into a new compoent directory codecs/rt5645-common/ along with a Makefile.
Some lines like cset "name='Stereo1 ADC1 Mux' 1" and cset "name='I2S2 Func Switch' on" are not set set in the chtrt5650 UCM sequences and thus are not present in the new component, in order to maximize reuse.
Signed-off-by: Russell Parker russell.parker7@gmail.com
diff --git a/configure.ac b/configure.ac index a0392bfe..307e7fc7 100644 --- a/configure.ac +++ b/configure.ac @@ -761,6 +761,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/codecs/Makefile \ src/conf/ucm/codecs/nau8824/Makefile \ src/conf/ucm/codecs/rt5640/Makefile \ + src/conf/ucm/codecs/rt5645-common/Makefile \ src/conf/ucm/codecs/rt5651/Makefile \ src/conf/ucm/platforms/Makefile \ src/conf/ucm/platforms/bytcr/Makefile \ diff --git a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf index 61848358..46508766 100644 --- a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf +++ b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf @@ -12,53 +12,9 @@ SectionVerb { cdev "hw:chtrt5645"
<platforms/bytcr/PlatformEnableSeq.conf> + <codecs/rt5645-common/EnableSeq.conf>
- # Output Configuration - cset "name='DAC1 L Mux' IF1 DAC" - cset "name='DAC1 R Mux' IF1 DAC" - cset "name='DAC1 MIXL DAC1 Switch' 1" - cset "name='DAC1 MIXR DAC1 Switch' 1" - cset "name='Stereo DAC MIXL DAC L1 Switch' 1" - cset "name='Stereo DAC MIXR DAC R1 Switch' 1" - - cset "name='DAC L2 Mux' IF2 DAC" - cset "name='DAC R2 Mux' IF2 DAC" - cset "name='Mono DAC MIXL DAC L2 Switch' on" - cset "name='Mono DAC MIXR DAC R2 Switch' on" - cset "name='DAC2 Playback Switch' on" - - cset "name='HPOVOL MIXL DAC1 Switch' on" - cset "name='HPOVOL MIXR DAC1 Switch' on" - cset "name='HPOVOL MIXL DAC2 Switch' on" - cset "name='HPOVOL MIXR DAC2 Switch' on" - cset "name='HPO MIX HPVOL Switch' on" - cset "name='HPOVOL L Switch' on" - cset "name='HPOVOL R Switch' on" - - cset "name='SPK MIXL DAC L1 Switch' on" - cset "name='SPK MIXR DAC R1 Switch' on" - cset "name='SPK MIXL DAC L2 Switch' on" - cset "name='SPK MIXR DAC R2 Switch' on" - cset "name='SPOL MIX SPKVOL L Switch' on" - cset "name='SPOR MIX SPKVOL R Switch' on" - cset "name='SPKVOL L Switch' on" - cset "name='SPKVOL R Switch' on" - - # Input Configuration - cset "name='Stereo1 DMIC Mux' 0" cset "name='Stereo1 ADC1 Mux' 1" - cset "name='Stereo1 ADC2 Mux' 1" - cset "name='ADC Capture Switch' on" - # 55/63 - cset "name='ADC Capture Volume' 55" - # set ADC Boost to 0/3, higher vals cause a lot of white noise - cset "name='ADC Boost Capture Volume' 0" - # 55/63 - cset "name='Mono ADC Capture Volume' 55" - # 0/3 - cset "name='Mono ADC Boost Capture Volume' 0" - # 27/31 - cset "name='IN Capture Volume' 27" cset "name='I2S2 Func Switch' on" # 3/12 the headphone mic tends to be quite loud cset "name='IN1 Boost' 3" @@ -69,21 +25,7 @@ SectionVerb { DisableSequence [ cdev "hw:chtrt5645"
- # Disable audio output path - cset "name='codec_out1 mix 0 pcm0_in Switch' off" - cset "name='media0_out mix 0 media1_in Switch' off" - - cset "name='media1_in Gain 0 Switch' off" - cset "name='pcm0_in Gain 0 Switch' off" - cset "name='codec_out1 Gain 0 Switch' off" - - # Disable audio input path - cset "name='pcm1_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop2_out mix 0 codec_in0 Switch' off" - - cset "name='media_loop2_out Gain 0 Switch' off" - cset "name='pcm1_out Gain 0 Switch' off" - cset "name='codec_in0 Gain 0 Switch' off" + <codecs/rt5645-common/DisableSeq.conf> ] }
diff --git a/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf b/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf index d043f685..c16cceac 100644 --- a/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf +++ b/src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/HiFi.conf @@ -12,53 +12,9 @@ SectionVerb { cdev "hw:chtrt5645"
<platforms/bytcr/PlatformEnableSeq.conf> + <codecs/rt5645-common/EnableSeq.conf>
- # Output Configuration - cset "name='DAC1 L Mux' IF1 DAC" - cset "name='DAC1 R Mux' IF1 DAC" - cset "name='DAC1 MIXL DAC1 Switch' 1" - cset "name='DAC1 MIXR DAC1 Switch' 1" - cset "name='Stereo DAC MIXL DAC L1 Switch' 1" - cset "name='Stereo DAC MIXR DAC R1 Switch' 1" - - cset "name='DAC L2 Mux' IF2 DAC" - cset "name='DAC R2 Mux' IF2 DAC" - cset "name='Mono DAC MIXL DAC L2 Switch' on" - cset "name='Mono DAC MIXR DAC R2 Switch' on" - cset "name='DAC2 Playback Switch' on" - - cset "name='HPOVOL MIXL DAC1 Switch' on" - cset "name='HPOVOL MIXR DAC1 Switch' on" - cset "name='HPOVOL MIXL DAC2 Switch' on" - cset "name='HPOVOL MIXR DAC2 Switch' on" - cset "name='HPO MIX HPVOL Switch' on" - cset "name='HPOVOL L Switch' on" - cset "name='HPOVOL R Switch' on" - - cset "name='SPK MIXL DAC L1 Switch' on" - cset "name='SPK MIXR DAC R1 Switch' on" - cset "name='SPK MIXL DAC L2 Switch' on" - cset "name='SPK MIXR DAC R2 Switch' on" - cset "name='SPOL MIX SPKVOL L Switch' on" - cset "name='SPOR MIX SPKVOL R Switch' on" - cset "name='SPKVOL L Switch' on" - cset "name='SPKVOL R Switch' on" - - # Input Configuration - cset "name='Stereo1 DMIC Mux' 0" cset "name='Stereo1 ADC1 Mux' 1" - cset "name='Stereo1 ADC2 Mux' 1" - cset "name='ADC Capture Switch' on" - # 55/63 - cset "name='ADC Capture Volume' 55" - # set ADC Boost to 0/3, higher vals cause a lot of white noise - cset "name='ADC Boost Capture Volume' 0" - # 55/63 - cset "name='Mono ADC Capture Volume' 55" - # 0/3 - cset "name='Mono ADC Boost Capture Volume' 0" - # 27/31 - cset "name='IN Capture Volume' 27" cset "name='I2S2 Func Switch' on" # 3/12 the headphone mic tends to be quite loud cset "name='IN1 Boost' 3" @@ -69,21 +25,7 @@ SectionVerb { DisableSequence [ cdev "hw:chtrt5645"
- # Disable audio output path - cset "name='codec_out1 mix 0 pcm0_in Switch' off" - cset "name='media0_out mix 0 media1_in Switch' off" - - cset "name='media1_in Gain 0 Switch' off" - cset "name='pcm0_in Gain 0 Switch' off" - cset "name='codec_out1 Gain 0 Switch' off" - - # Disable audio input path - cset "name='pcm1_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop2_out mix 0 codec_in0 Switch' off" - - cset "name='media_loop2_out Gain 0 Switch' off" - cset "name='pcm1_out Gain 0 Switch' off" - cset "name='codec_in0 Gain 0 Switch' off" + <codecs/rt5645-common/DisableSeq.conf> ] }
diff --git a/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf b/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf index c4452a4e..45cc5186 100644 --- a/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf +++ b/src/conf/ucm/chtrt5645-mono-speaker-analog-mic/HiFi.conf @@ -12,53 +12,9 @@ SectionVerb { cdev "hw:chtrt5645"
<platforms/bytcr/PlatformEnableSeq.conf> + <codecs/rt5645-common/EnableSeq.conf>
- # Output Configuration - cset "name='DAC1 L Mux' IF1 DAC" - cset "name='DAC1 R Mux' IF1 DAC" - cset "name='DAC1 MIXL DAC1 Switch' 1" - cset "name='DAC1 MIXR DAC1 Switch' 1" - cset "name='Stereo DAC MIXL DAC L1 Switch' 1" - cset "name='Stereo DAC MIXR DAC R1 Switch' 1" - - cset "name='DAC L2 Mux' IF2 DAC" - cset "name='DAC R2 Mux' IF2 DAC" - cset "name='Mono DAC MIXL DAC L2 Switch' on" - cset "name='Mono DAC MIXR DAC R2 Switch' on" - cset "name='DAC2 Playback Switch' on" - - cset "name='HPOVOL MIXL DAC1 Switch' on" - cset "name='HPOVOL MIXR DAC1 Switch' on" - cset "name='HPOVOL MIXL DAC2 Switch' on" - cset "name='HPOVOL MIXR DAC2 Switch' on" - cset "name='HPO MIX HPVOL Switch' on" - cset "name='HPOVOL L Switch' on" - cset "name='HPOVOL R Switch' on" - - cset "name='SPK MIXL DAC L1 Switch' on" - cset "name='SPK MIXR DAC R1 Switch' on" - cset "name='SPK MIXL DAC L2 Switch' on" - cset "name='SPK MIXR DAC R2 Switch' on" - cset "name='SPOL MIX SPKVOL L Switch' on" - cset "name='SPOR MIX SPKVOL R Switch' on" - cset "name='SPKVOL L Switch' on" - cset "name='SPKVOL R Switch' on" - - # Input Configuration - cset "name='Stereo1 DMIC Mux' 0" cset "name='Stereo1 ADC1 Mux' 1" - cset "name='Stereo1 ADC2 Mux' 1" - cset "name='ADC Capture Switch' on" - # 55/63 - cset "name='ADC Capture Volume' 55" - # set ADC Boost to 0/3, higher vals cause a lot of white noise - cset "name='ADC Boost Capture Volume' 0" - # 55/63 - cset "name='Mono ADC Capture Volume' 55" - # 0/3 - cset "name='Mono ADC Boost Capture Volume' 0" - # 27/31 - cset "name='IN Capture Volume' 27" cset "name='I2S2 Func Switch' on" # 3/12 the headphone mic tends to be quite loud cset "name='IN1 Boost' 3" @@ -69,21 +25,7 @@ SectionVerb { DisableSequence [ cdev "hw:chtrt5645"
- # Disable audio output path - cset "name='codec_out1 mix 0 pcm0_in Switch' off" - cset "name='media0_out mix 0 media1_in Switch' off" - - cset "name='media1_in Gain 0 Switch' off" - cset "name='pcm0_in Gain 0 Switch' off" - cset "name='codec_out1 Gain 0 Switch' off" - - # Disable audio input path - cset "name='pcm1_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop2_out mix 0 codec_in0 Switch' off" - - cset "name='media_loop2_out Gain 0 Switch' off" - cset "name='pcm1_out Gain 0 Switch' off" - cset "name='codec_in0 Gain 0 Switch' off" + <codecs/rt5645-common/DisableSeq.conf> ] }
diff --git a/src/conf/ucm/chtrt5645/HiFi.conf b/src/conf/ucm/chtrt5645/HiFi.conf index 422f3b7e..bc4801d8 100644 --- a/src/conf/ucm/chtrt5645/HiFi.conf +++ b/src/conf/ucm/chtrt5645/HiFi.conf @@ -1,4 +1,3 @@ - SectionVerb { # ALSA PCM Value { @@ -13,53 +12,9 @@ SectionVerb { cdev "hw:chtrt5645"
<platforms/bytcr/PlatformEnableSeq.conf> + <codecs/rt5645-common/EnableSeq.conf>
- # Output Configuration - cset "name='DAC1 L Mux' IF1 DAC" - cset "name='DAC1 R Mux' IF1 DAC" - cset "name='DAC1 MIXL DAC1 Switch' 1" - cset "name='DAC1 MIXR DAC1 Switch' 1" - cset "name='Stereo DAC MIXL DAC L1 Switch' 1" - cset "name='Stereo DAC MIXR DAC R1 Switch' 1" - - cset "name='DAC L2 Mux' IF2 DAC" - cset "name='DAC R2 Mux' IF2 DAC" - cset "name='Mono DAC MIXL DAC L2 Switch' on" - cset "name='Mono DAC MIXR DAC R2 Switch' on" - cset "name='DAC2 Playback Switch' on" - - cset "name='HPOVOL MIXL DAC1 Switch' on" - cset "name='HPOVOL MIXR DAC1 Switch' on" - cset "name='HPOVOL MIXL DAC2 Switch' on" - cset "name='HPOVOL MIXR DAC2 Switch' on" - cset "name='HPO MIX HPVOL Switch' on" - cset "name='HPOVOL L Switch' on" - cset "name='HPOVOL R Switch' on" - - cset "name='SPK MIXL DAC L1 Switch' on" - cset "name='SPK MIXR DAC R1 Switch' on" - cset "name='SPK MIXL DAC L2 Switch' on" - cset "name='SPK MIXR DAC R2 Switch' on" - cset "name='SPOL MIX SPKVOL L Switch' on" - cset "name='SPOR MIX SPKVOL R Switch' on" - cset "name='SPKVOL L Switch' on" - cset "name='SPKVOL R Switch' on" - - # Input Configuration - cset "name='Stereo1 DMIC Mux' 0" cset "name='Stereo1 ADC1 Mux' 1" - cset "name='Stereo1 ADC2 Mux' 1" - cset "name='ADC Capture Switch' on" - # 55/63 - cset "name='ADC Capture Volume' 55" - # set ADC Boost to 0/3, higher vals cause a lot of white noise - cset "name='ADC Boost Capture Volume' 0" - # 55/63 - cset "name='Mono ADC Capture Volume' 55" - # 0/3 - cset "name='Mono ADC Boost Capture Volume' 0" - # 27/31 - cset "name='IN Capture Volume' 27" cset "name='I2S2 Func Switch' on" # 3/12 the headphone mic tends to be quite loud cset "name='IN1 Boost' 3" @@ -70,21 +25,7 @@ SectionVerb { DisableSequence [ cdev "hw:chtrt5645"
- # Disable audio output path - cset "name='codec_out1 mix 0 pcm0_in Switch' off" - cset "name='media0_out mix 0 media1_in Switch' off" - - cset "name='media1_in Gain 0 Switch' off" - cset "name='pcm0_in Gain 0 Switch' off" - cset "name='codec_out1 Gain 0 Switch' off" - - # Disable audio input path - cset "name='pcm1_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop2_out mix 0 codec_in0 Switch' off" - - cset "name='media_loop2_out Gain 0 Switch' off" - cset "name='pcm1_out Gain 0 Switch' off" - cset "name='codec_in0 Gain 0 Switch' off" + <codecs/rt5645-common/DisableSeq.conf> ] }
diff --git a/src/conf/ucm/chtrt5650/HiFi.conf b/src/conf/ucm/chtrt5650/HiFi.conf index cc3d64bf..7142dece 100644 --- a/src/conf/ucm/chtrt5650/HiFi.conf +++ b/src/conf/ucm/chtrt5650/HiFi.conf @@ -13,73 +13,19 @@ SectionVerb { cdev "hw:chtrt5650"
<platforms/bytcr/PlatformEnableSeq.conf> + <codecs/rt5645-common/EnableSeq.conf>
- # Output Configuration - cset "name='DAC1 L Mux' IF1 DAC" - cset "name='DAC1 R Mux' IF1 DAC" - cset "name='DAC1 MIXL DAC1 Switch' 1" - cset "name='DAC1 MIXR DAC1 Switch' 1" - cset "name='Stereo DAC MIXL DAC L1 Switch' 1" - cset "name='Stereo DAC MIXR DAC R1 Switch' 1" cset "name='Speaker HWEQ' 1,164,237,135,1,165,0,0,1,166,237,135,1,167,0,0,1,192,30,196,1,193,0,0,1,194,30,196,1,195,0,0,1,196,31,180,1,197,0,75,1,198,31,180,1,199,31,180,1,200,0,75,1,201,31,180,0,177,51,224" cset "name='DAC1 Playback Volume' 77,77" - cset "name='Speaker ClassD Playback Volume' 4" - - cset "name='DAC L2 Mux' IF2 DAC" - cset "name='DAC R2 Mux' IF2 DAC" - cset "name='Mono DAC MIXL DAC L2 Switch' on" - cset "name='Mono DAC MIXR DAC R2 Switch' on" - cset "name='DAC2 Playback Switch' on" - - cset "name='HPOVOL MIXL DAC1 Switch' on" - cset "name='HPOVOL MIXR DAC1 Switch' on" - cset "name='HPOVOL MIXL DAC2 Switch' on" - cset "name='HPOVOL MIXR DAC2 Switch' on" - cset "name='HPO MIX HPVOL Switch' on" - cset "name='HPOVOL L Switch' on" - cset "name='HPOVOL R Switch' on" - - cset "name='SPK MIXL DAC L1 Switch' on" - cset "name='SPK MIXR DAC R1 Switch' on" - cset "name='SPK MIXL DAC L2 Switch' on" - cset "name='SPK MIXR DAC R2 Switch' on" - cset "name='SPOL MIX SPKVOL L Switch' on" - cset "name='SPOR MIX SPKVOL R Switch' on" - cset "name='SPKVOL L Switch' on" - cset "name='SPKVOL R Switch' on" - - # Input Configuration - cset "name='Stereo1 DMIC Mux' 0" - cset "name='Stereo1 ADC2 Mux' 1" - cset "name='ADC Capture Switch' on" - cset "name='ADC Capture Volume' 74" - cset "name='ADC Boost Capture Volume' 3" - cset "name='Mono ADC Capture Volume' 74" - cset "name='Mono ADC Boost Capture Volume' 2" - cset "name='IN Capture Volume' 63" - cset "name='RT5650 IF1 ADC Mux' 0" cset "name='I2S2 Func Switch' off" + cset "name='RT5650 IF1 ADC Mux' 0" ]
DisableSequence [ cdev "hw:chtrt5650"
- # Disable audio output path - cset "name='codec_out1 mix 0 pcm0_in Switch' off" - cset "name='media0_out mix 0 media1_in Switch' off" - - cset "name='media1_in Gain 0 Switch' off" - cset "name='pcm0_in Gain 0 Switch' off" - cset "name='codec_out1 Gain 0 Switch' off" - - # Disable audio input path - cset "name='pcm1_out mix 0 media_loop2_in Switch' off" - cset "name='media_loop2_out mix 0 codec_in0 Switch' off" - - cset "name='media_loop2_out Gain 0 Switch' off" - cset "name='pcm1_out Gain 0 Switch' off" - cset "name='codec_in0 Gain 0 Switch' off" + <codecs/rt5645-common/DisableSeq.conf> ] }
diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am index 2b374acb..ac1a56dc 100644 --- a/src/conf/ucm/codecs/Makefile.am +++ b/src/conf/ucm/codecs/Makefile.am @@ -1,4 +1,5 @@ SUBDIRS=\ rt5640 \ +rt5645-common \ rt5651 \ nau8824 diff --git a/src/conf/ucm/codecs/rt5645-common/DisableSeq.conf b/src/conf/ucm/codecs/rt5645-common/DisableSeq.conf new file mode 100644 index 00000000..5127d1ae --- /dev/null +++ b/src/conf/ucm/codecs/rt5645-common/DisableSeq.conf @@ -0,0 +1,15 @@ +# Disable audio output path +cset "name='codec_out1 mix 0 pcm0_in Switch' off" +cset "name='media0_out mix 0 media1_in Switch' off" + +cset "name='media1_in Gain 0 Switch' off" +cset "name='pcm0_in Gain 0 Switch' off" +cset "name='codec_out1 Gain 0 Switch' off" + +# Disable audio input path +cset "name='pcm1_out mix 0 media_loop2_in Switch' off" +cset "name='media_loop2_out mix 0 codec_in0 Switch' off" + +cset "name='media_loop2_out Gain 0 Switch' off" +cset "name='pcm1_out Gain 0 Switch' off" +cset "name='codec_in0 Gain 0 Switch' off" diff --git a/src/conf/ucm/codecs/rt5645-common/EnableSeq.conf b/src/conf/ucm/codecs/rt5645-common/EnableSeq.conf new file mode 100644 index 00000000..d3ad4cf9 --- /dev/null +++ b/src/conf/ucm/codecs/rt5645-common/EnableSeq.conf @@ -0,0 +1,46 @@ +# Output Configuration +cset "name='DAC1 L Mux' IF1 DAC" +cset "name='DAC1 R Mux' IF1 DAC" +cset "name='DAC1 MIXL DAC1 Switch' 1" +cset "name='DAC1 MIXR DAC1 Switch' 1" +cset "name='Stereo DAC MIXL DAC L1 Switch' 1" +cset "name='Stereo DAC MIXR DAC R1 Switch' 1" + +cset "name='DAC L2 Mux' IF2 DAC" +cset "name='DAC R2 Mux' IF2 DAC" +cset "name='Mono DAC MIXL DAC L2 Switch' on" +cset "name='Mono DAC MIXR DAC R2 Switch' on" +cset "name='DAC2 Playback Switch' on" + +cset "name='HPOVOL MIXL DAC1 Switch' on" +cset "name='HPOVOL MIXR DAC1 Switch' on" +cset "name='HPOVOL MIXL DAC2 Switch' on" +cset "name='HPOVOL MIXR DAC2 Switch' on" +cset "name='HPO MIX HPVOL Switch' on" +cset "name='HPOVOL L Switch' on" +cset "name='HPOVOL R Switch' on" + +cset "name='SPK MIXL DAC L1 Switch' on" +cset "name='SPK MIXR DAC R1 Switch' on" +cset "name='SPK MIXL DAC L2 Switch' on" +cset "name='SPK MIXR DAC R2 Switch' on" +cset "name='SPOL MIX SPKVOL L Switch' on" +cset "name='SPOR MIX SPKVOL R Switch' on" +cset "name='SPKVOL L Switch' on" +cset "name='SPKVOL R Switch' on" + +# Input Configuration +cset "name='Stereo1 DMIC Mux' 0" +cset "name='Stereo1 ADC2 Mux' 1" +cset "name='ADC Capture Switch' on" + +# 55/63 +cset "name='ADC Capture Volume' 55" +# set ADC Boost to 0/3, higher vals cause a lot of white noise +cset "name='ADC Boost Capture Volume' 0" +# 55/63 +cset "name='Mono ADC Capture Volume' 55" +# 0/3 +cset "name='Mono ADC Boost Capture Volume' 0" +# 27/31 +cset "name='IN Capture Volume' 27" diff --git a/src/conf/ucm/codecs/rt5645-common/Makefile.am b/src/conf/ucm/codecs/rt5645-common/Makefile.am new file mode 100644 index 00000000..f351fa37 --- /dev/null +++ b/src/conf/ucm/codecs/rt5645-common/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/codecs/rt5645-common +ucm_DATA = DisableSeq.conf EnableSeq.conf +EXTRA_DIST = $(ucm_DATA)