Update lpass lpi pin control driver to accommodate new lpass variant SoC specific drivers. Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file and common declarations to pinctrl-lpass-lpi.h header file.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org --- drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 251 +----------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 139 +++++++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++++ 4 files changed, 271 insertions(+), 245 deletions(-) create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 7a12e8c..74568cf 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2f19ab4..2641489 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,237 +4,16 @@ * Copyright (c) 2020 Linaro Ltd. */
-#include <linux/bitops.h> -#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/gpio/driver.h> -#include <linux/io.h> -#include <linux/module.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/types.h> #include "../core.h" #include "../pinctrl-utils.h" +#include "pinctrl-lpass-lpi.h"
-#define LPI_SLEW_RATE_CTL_REG 0xa000 -#define LPI_TLMM_REG_OFFSET 0x1000 -#define LPI_SLEW_RATE_MAX 0x03 -#define LPI_SLEW_BITS_SIZE 0x02 -#define LPI_SLEW_RATE_MASK GENMASK(1, 0) -#define LPI_GPIO_CFG_REG 0x00 -#define LPI_GPIO_PULL_MASK GENMASK(1, 0) -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) -#define LPI_GPIO_OE_MASK BIT(9) -#define LPI_GPIO_VALUE_REG 0x04 -#define LPI_GPIO_VALUE_IN_MASK BIT(0) -#define LPI_GPIO_VALUE_OUT_MASK BIT(1) - -#define LPI_GPIO_BIAS_DISABLE 0x0 -#define LPI_GPIO_PULL_DOWN 0x1 -#define LPI_GPIO_KEEPER 0x2 -#define LPI_GPIO_PULL_UP 0x3 -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) -#define NO_SLEW -1 - -#define LPI_FUNCTION(fname) \ - [LPI_MUX_##fname] = { \ - .name = #fname, \ - .groups = fname##_groups, \ - .ngroups = ARRAY_SIZE(fname##_groups), \ - } - -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ - { \ - .name = "gpio" #id, \ - .pins = gpio##id##_pins, \ - .pin = id, \ - .slew_offset = soff, \ - .npins = ARRAY_SIZE(gpio##id##_pins), \ - .funcs = (int[]){ \ - LPI_MUX_gpio, \ - LPI_MUX_##f1, \ - LPI_MUX_##f2, \ - LPI_MUX_##f3, \ - LPI_MUX_##f4, \ - }, \ - .nfuncs = 5, \ - } - -struct lpi_pingroup { - const char *name; - const unsigned int *pins; - unsigned int npins; - unsigned int pin; - /* Bit offset in slew register for SoundWire pins only */ - int slew_offset; - unsigned int *funcs; - unsigned int nfuncs; -}; - -struct lpi_function { - const char *name; - const char * const *groups; - unsigned int ngroups; -}; - -struct lpi_pinctrl_variant_data { - const struct pinctrl_pin_desc *pins; - int npins; - const struct lpi_pingroup *groups; - int ngroups; - const struct lpi_function *functions; - int nfunctions; -}; - -#define MAX_LPI_NUM_CLKS 2 - -struct lpi_pinctrl { - struct device *dev; - struct pinctrl_dev *ctrl; - struct gpio_chip chip; - struct pinctrl_desc desc; - char __iomem *tlmm_base; - char __iomem *slew_base; - struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; - struct mutex slew_access_lock; - const struct lpi_pinctrl_variant_data *data; -}; - -/* sm8250 variant specific data */ -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { - PINCTRL_PIN(0, "gpio0"), - PINCTRL_PIN(1, "gpio1"), - PINCTRL_PIN(2, "gpio2"), - PINCTRL_PIN(3, "gpio3"), - PINCTRL_PIN(4, "gpio4"), - PINCTRL_PIN(5, "gpio5"), - PINCTRL_PIN(6, "gpio6"), - PINCTRL_PIN(7, "gpio7"), - PINCTRL_PIN(8, "gpio8"), - PINCTRL_PIN(9, "gpio9"), - PINCTRL_PIN(10, "gpio10"), - PINCTRL_PIN(11, "gpio11"), - PINCTRL_PIN(12, "gpio12"), - PINCTRL_PIN(13, "gpio13"), -}; - -enum sm8250_lpi_functions { - LPI_MUX_dmic1_clk, - LPI_MUX_dmic1_data, - LPI_MUX_dmic2_clk, - LPI_MUX_dmic2_data, - LPI_MUX_dmic3_clk, - LPI_MUX_dmic3_data, - LPI_MUX_i2s1_clk, - LPI_MUX_i2s1_data, - LPI_MUX_i2s1_ws, - LPI_MUX_i2s2_clk, - LPI_MUX_i2s2_data, - LPI_MUX_i2s2_ws, - LPI_MUX_qua_mi2s_data, - LPI_MUX_qua_mi2s_sclk, - LPI_MUX_qua_mi2s_ws, - LPI_MUX_swr_rx_clk, - LPI_MUX_swr_rx_data, - LPI_MUX_swr_tx_clk, - LPI_MUX_swr_tx_data, - LPI_MUX_wsa_swr_clk, - LPI_MUX_wsa_swr_data, - LPI_MUX_gpio, - LPI_MUX__, -}; - -static const unsigned int gpio0_pins[] = { 0 }; -static const unsigned int gpio1_pins[] = { 1 }; -static const unsigned int gpio2_pins[] = { 2 }; -static const unsigned int gpio3_pins[] = { 3 }; -static const unsigned int gpio4_pins[] = { 4 }; -static const unsigned int gpio5_pins[] = { 5 }; -static const unsigned int gpio6_pins[] = { 6 }; -static const unsigned int gpio7_pins[] = { 7 }; -static const unsigned int gpio8_pins[] = { 8 }; -static const unsigned int gpio9_pins[] = { 9 }; -static const unsigned int gpio10_pins[] = { 10 }; -static const unsigned int gpio11_pins[] = { 11 }; -static const unsigned int gpio12_pins[] = { 12 }; -static const unsigned int gpio13_pins[] = { 13 }; -static const char * const swr_tx_clk_groups[] = { "gpio0" }; -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; -static const char * const swr_rx_clk_groups[] = { "gpio3" }; -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; -static const char * const dmic1_clk_groups[] = { "gpio6" }; -static const char * const dmic1_data_groups[] = { "gpio7" }; -static const char * const dmic2_clk_groups[] = { "gpio8" }; -static const char * const dmic2_data_groups[] = { "gpio9" }; -static const char * const i2s2_clk_groups[] = { "gpio10" }; -static const char * const i2s2_ws_groups[] = { "gpio11" }; -static const char * const dmic3_clk_groups[] = { "gpio12" }; -static const char * const dmic3_data_groups[] = { "gpio13" }; -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; -static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; -static const char * const i2s1_clk_groups[] = { "gpio6" }; -static const char * const i2s1_ws_groups[] = { "gpio7" }; -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; -static const char * const wsa_swr_clk_groups[] = { "gpio10" }; -static const char * const wsa_swr_data_groups[] = { "gpio11" }; -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; - -static const struct lpi_pingroup sm8250_groups[] = { - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), - LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), - LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), - LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), - LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), - LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), - LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), -}; - -static const struct lpi_function sm8250_functions[] = { - LPI_FUNCTION(dmic1_clk), - LPI_FUNCTION(dmic1_data), - LPI_FUNCTION(dmic2_clk), - LPI_FUNCTION(dmic2_data), - LPI_FUNCTION(dmic3_clk), - LPI_FUNCTION(dmic3_data), - LPI_FUNCTION(i2s1_clk), - LPI_FUNCTION(i2s1_data), - LPI_FUNCTION(i2s1_ws), - LPI_FUNCTION(i2s2_clk), - LPI_FUNCTION(i2s2_data), - LPI_FUNCTION(i2s2_ws), - LPI_FUNCTION(qua_mi2s_data), - LPI_FUNCTION(qua_mi2s_sclk), - LPI_FUNCTION(qua_mi2s_ws), - LPI_FUNCTION(swr_rx_clk), - LPI_FUNCTION(swr_rx_data), - LPI_FUNCTION(swr_tx_clk), - LPI_FUNCTION(swr_tx_data), - LPI_FUNCTION(wsa_swr_clk), - LPI_FUNCTION(wsa_swr_data), -}; - -static struct lpi_pinctrl_variant_data sm8250_lpi_data = { - .pins = sm8250_lpi_pins, - .npins = ARRAY_SIZE(sm8250_lpi_pins), - .groups = sm8250_groups, - .ngroups = ARRAY_SIZE(sm8250_groups), - .functions = sm8250_functions, - .nfunctions = ARRAY_SIZE(sm8250_functions), -};
static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin, unsigned int addr) @@ -582,7 +361,7 @@ static const struct gpio_chip lpi_gpio_template = { .dbg_show = lpi_gpio_dbg_show, };
-static int lpi_pinctrl_probe(struct platform_device *pdev) +int lpi_pinctrl_probe(struct platform_device *pdev) { const struct lpi_pinctrl_variant_data *data; struct device *dev = &pdev->dev; @@ -661,8 +440,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
return ret; } +EXPORT_SYMBOL(lpi_pinctrl_probe); +
-static int lpi_pinctrl_remove(struct platform_device *pdev) +int lpi_pinctrl_remove(struct platform_device *pdev) { struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
@@ -671,25 +452,5 @@ static int lpi_pinctrl_remove(struct platform_device *pdev)
return 0; } +EXPORT_SYMBOL(lpi_pinctrl_remove);
-static const struct of_device_id lpi_pinctrl_of_match[] = { - { - .compatible = "qcom,sm8250-lpass-lpi-pinctrl", - .data = &sm8250_lpi_data, - }, - { } -}; -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); - -static struct platform_driver lpi_pinctrl_driver = { - .driver = { - .name = "qcom-lpass-lpi-pinctrl", - .of_match_table = lpi_pinctrl_of_match, - }, - .probe = lpi_pinctrl_probe, - .remove = lpi_pinctrl_remove, -}; - -module_platform_driver(lpi_pinctrl_driver); -MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h new file mode 100644 index 0000000..b0afb40 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -0,0 +1,139 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ +#ifndef __PINCTRL_LPASS_LPI_H__ +#define __PINCTRL_LPASS_LPI_H__ + +#define LPI_SLEW_RATE_CTL_REG 0xa000 +#define LPI_TLMM_REG_OFFSET 0x1000 +#define LPI_SLEW_RATE_MAX 0x03 +#define LPI_SLEW_BITS_SIZE 0x02 +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) +#define LPI_GPIO_CFG_REG 0x00 +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) +#define LPI_GPIO_OE_MASK BIT(9) +#define LPI_GPIO_VALUE_REG 0x04 +#define LPI_GPIO_VALUE_IN_MASK BIT(0) +#define LPI_GPIO_VALUE_OUT_MASK BIT(1) + +#define LPI_GPIO_BIAS_DISABLE 0x0 +#define LPI_GPIO_PULL_DOWN 0x1 +#define LPI_GPIO_KEEPER 0x2 +#define LPI_GPIO_PULL_UP 0x3 +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) +#define NO_SLEW -1 + +#define LPI_FUNCTION(fname) \ + [LPI_MUX_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .pin = id, \ + .slew_offset = soff, \ + .npins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + LPI_MUX_gpio, \ + LPI_MUX_##f1, \ + LPI_MUX_##f2, \ + LPI_MUX_##f3, \ + LPI_MUX_##f4, \ + }, \ + .nfuncs = 5, \ + } + +struct lpi_pingroup { + const char *name; + const unsigned int *pins; + unsigned int npins; + unsigned int pin; + /* Bit offset in slew register for SoundWire pins only */ + int slew_offset; + unsigned int *funcs; + unsigned int nfuncs; +}; + +struct lpi_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +struct lpi_pinctrl_variant_data { + const struct pinctrl_pin_desc *pins; + int npins; + const struct lpi_pingroup *groups; + int ngroups; + const struct lpi_function *functions; + int nfunctions; +}; + +#define MAX_LPI_NUM_CLKS 2 + +struct lpi_pinctrl { + struct device *dev; + struct pinctrl_dev *ctrl; + struct gpio_chip chip; + struct pinctrl_desc desc; + char __iomem *tlmm_base; + char __iomem *slew_base; + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; + struct mutex slew_access_lock; + const struct lpi_pinctrl_variant_data *data; +}; + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static const unsigned int gpio0_pins[] = { 0 }; +static const unsigned int gpio1_pins[] = { 1 }; +static const unsigned int gpio2_pins[] = { 2 }; +static const unsigned int gpio3_pins[] = { 3 }; +static const unsigned int gpio4_pins[] = { 4 }; +static const unsigned int gpio5_pins[] = { 5 }; +static const unsigned int gpio6_pins[] = { 6 }; +static const unsigned int gpio7_pins[] = { 7 }; +static const unsigned int gpio8_pins[] = { 8 }; +static const unsigned int gpio9_pins[] = { 9 }; +static const unsigned int gpio10_pins[] = { 10 }; +static const unsigned int gpio11_pins[] = { 11 }; +static const unsigned int gpio12_pins[] = { 12 }; +static const unsigned int gpio13_pins[] = { 13 }; + +int lpi_pinctrl_probe(struct platform_device *pdev); +int lpi_pinctrl_remove(struct platform_device *pdev); + +#endif /*__PINCTRL_LPASS_LPI_H__*/ + diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c new file mode 100644 index 0000000..3eba8b3 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ + +#include <linux/clk.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "pinctrl-lpass-lpi.h" + +/* sm8250 variant specific data */ +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; + +static const struct lpi_pingroup sm8250_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), + LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), +}; + +static const struct lpi_function sm8250_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static struct lpi_pinctrl_variant_data sm8250_lpi_data = { + .pins = sm8250_lpi_pins, + .npins = ARRAY_SIZE(sm8250_lpi_pins), + .groups = sm8250_groups, + .ngroups = ARRAY_SIZE(sm8250_groups), + .functions = sm8250_functions, + .nfunctions = ARRAY_SIZE(sm8250_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sm8250-lpass-lpi-pinctrl", + .data = &sm8250_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8250-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); +