as long as the io channel number is not set by the driver, the card is not visible from the ethersound network
Signed-off-by: Tim Blechmann tim@klingt.org --- sound/pci/lx6464es/lx6464es.c | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c index ccf1b38..c92fba5 100644 --- a/sound/pci/lx6464es/lx6464es.c +++ b/sound/pci/lx6464es/lx6464es.c @@ -654,13 +654,12 @@ static int __devinit lx_init_ethersound_config(struct lx6464es *chip) int i; u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
- u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) | + /* configure 64 io channels */ + u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) | (64 << IOCR_INPUTS_OFFSET) | + (64 << IOCR_OUTPUTS_OFFSET) | (FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
- u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) - | (default_conf_es & CONFES_WRITE_PART_MASK); - snd_printdd("->lx_init_ethersound\n");
chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;