The I2S mux clock can be used to select the I2S input clock. The available parents are the peripheral and the generated clocks.
Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com --- .../devicetree/bindings/clock/at91-clock.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index 51c259a..1c46b3c 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -90,6 +90,8 @@ Required properties: "atmel,sama5d2-clk-audio-pll-pmc" at91 audio pll output on AUDIOPLLCLK that feeds the PMC and can be used by peripheral clock or generic clock + "atmel,sama5d2-clk-i2s-mux": + at91 I2S clock source selection
Required properties for SCKC node: - reg : defines the IO memory reserved for the SCKC. @@ -507,3 +509,35 @@ For example: atmel,clk-output-range = <0 83000000>; }; }; + +Required properties for I2S mux clocks: +- #size-cells : shall be 0 (reg is used to encode I2S bus id). +- #address-cells : shall be 1 (reg is used to encode I2S bus id). +- name: device tree node describing a specific mux clock. + * #clock-cells : from common clock binding; shall be set to 0. + * clocks : shall be the mux clock parent phandles; shall be 2 phandles: + peripheral and generated clock; the first phandle shall belong to the + peripheral clock and the second one shall belong to the generated + clock; "clock-indices" property can be user to specify + the correct order. + * reg: I2S bus id of the corresponding mux clock. + e.g. reg = <0>; for i2s0, reg = <1>; for i2s1 + +For example: + i2s_clkmux { + compatible = "atmel,sama5d2-clk-i2s-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2s0muxck: i2s0_muxclk { + clocks = <&i2s0_clk>, <&i2s0_gclk>; + #clock-cells = <0>; + reg = <0>; + }; + + i2s1muxck: i2s1_muxclk { + clocks = <&i2s1_clk>, <&i2s1_gclk>; + #clock-cells = <0>; + reg = <1>; + }; + };