2011/2/1 Robin Neatherway neatherway@gmail.com
Because ubuntu had disabled OSS emulation , you have to disable OSS emulation too.
./configure --with-oss=no
Thanks for the tip. I've compiled the 1.0.24 drivers tarball using ./configure --with-debug=full --with-oss=no and it now loads correctly. I have a large number of controls in alsamixer, having set model=test in /etc/modprobe.d/alsa-base.conf.
The control names are now generic, but I have found that LOUT1 is the headphones and LOUT2 is the speakers. There are also GPIO pins 0-3 available. I have tried toggling these, but it does not affect the jack sense, which still does not operate.
The new alsa-info is at the following URL: http://www.alsa-project.org/db/?f=3fb1a67066b9d06ac8405685ff7358af053e2668
Do you mean
LOUT1 playback volume control at node 0x8 affect the volume of your headphone and LOUT2 playback volume control at node 0x9 affect the volume of your speakers ?
If you look at 4.1 Block Diagram of alc260 datasheet ,
LOUT1 is connected to 0xf Line Out and LOUT2 is connected to 0x10 HP