Olof Johansson wrote:
+static struct of_device_id mpc8610_ids[] = {
- { .type = "soc", },
- {}
Please scan based on compatible instead of device_type.
I was just following the example from another board file. However, the 'soc' node in the device tree does not have a compatible property, so I don't how to change this.
+config SND_SOC_MPC8610
- bool "ALSA SoC support for the MPC8610 SOC"
- depends on SND_SOC #&& MPC8610_HPCD
- default y #if MPC8610
- help
Say Y if you want to add support for codecs attached to the SSIdevice on an MPC8610.Don't default configs to 'y'. Also, what's with the commented-out dependencies and if?
Sorry, that was a development change that I forgot to put back. The "y #" should be deleted.
- ssi_stx_phys: bus address of SSI STX register
- ssi_srx_phys: bus address of SSI SRX register
- dma_channel: pointer to the DMA channel's registers
- irq: IRQ for this DMA channel
- assigned: set to 1 if that DMA channel is assigned to a substream
- */
This goes for the whole patch: You've got good documentation, but it's not in docbook format. Please reformat it since it should be a pretty simple thing to do.
Ok.
+static int fsl_dma_new(struct snd_card *card, struct snd_soc_codec_dai *dai,
- struct snd_pcm *pcm)
+{
- static u64 fsl_dma_dmamask = 0xffffffff;
- int ret;
- if (!card->dev->dma_mask)
card->dev->dma_mask = &fsl_dma_dmamask;I haven't read how your channel allocation works, but providing a pointer to a local static variable is a bit fishy no matter what.
I just copied this code from another module. All the ALSA drivers do this, but I'll look into it and see if it can't be done different. I make no promises, though!
Do you ever anticipate having other dma users on the system, such as memcpy offload? You'll probably need allocation support for channels when that day comes (I ended up writing a simple library for dma channel management for that very reason on my platform).
Yes, I plan on updating this driver to work with the standard Freescale "Elo" device driver, but that will have to wait until that code is in the kernel and stabilized. The SSI is limited in which DMA channels it can use, anyway.