At Sun, 12 Oct 2008 05:54:35 +0800, Zhi Xiong wrote:
Hi,
I own a creative sound blaster 5.1vx card, its model is sb1070, and its based on CA0106 and an ADC I believed to be a WM8772S(74AAWR2) chip, for the rest, my weak eyes can't really see it.
I tested the driver on 2.6.20 and 2.6.26, both of them didn't work, so I believed this model is not yet "supported" by the driver, I added the lines below into ca0106_chip_details inside ca0106_main.c and the card works.
{ .serial = 0x10041102, .name = "Sound Blaster 5.1vx [SB1070]", .gpio_type = 1, .i2c_adc = 1, .spi_dac = 1 } ,But I don't really know what gpio_type, .i2c_adc, .spi_dac . I do noticed that setting gpio_type to 1 or 2 will work and not setting it will have some performance issue.
I wish can write the code more accurately to the specs and hopefully this few lines of code will get added to the next alsa release for others to use.
So, can anyone please explain to me what the 3 parameters do? Thanks in advanced.
gpio_type = 1 means that the board has a shared mic-in/line-in while gpio_type = 2 means that the board has a shared side-out/line-in.
With i2c_adc=1, the driver adds some capture volume controls, phone, mic, line-in and aux. Check whether these controls really work.
Also, spi_dac=1 adds the mute switch for each analog output, front, rear, etc. Also check whether this works properly.
If everything is checked, please submit a patch to merge to the upstream. See Documentation/SubmittingPatches in linux kernel tree for details.
thanks,
Takashi