0x20FF(amp global enable) register was defined as non-volatile, but it is not. Overheating, overcurrent can cause amp shutdown in hardware. 'regmap_write' compare register readback value before writing to avoid same value writing. 'regmap_read' just read cache not actual hardware value for the non-volatile register. When amp is internally shutdown by some reason, next 'AMP ON' command can be ignored because regmap think amp is already ON.
Signed-off-by: Ryan Lee ryans.lee@maximintegrated.com --- sound/soc/codecs/max98373-i2c.c | 1 + sound/soc/codecs/max98373-sdw.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/sound/soc/codecs/max98373-i2c.c b/sound/soc/codecs/max98373-i2c.c index 85f6865019d4..ddb6436835d7 100644 --- a/sound/soc/codecs/max98373-i2c.c +++ b/sound/soc/codecs/max98373-i2c.c @@ -446,6 +446,7 @@ static bool max98373_volatile_reg(struct device *dev, unsigned int reg) case MAX98373_R2054_MEAS_ADC_PVDD_CH_READBACK: case MAX98373_R2055_MEAS_ADC_THERM_CH_READBACK: case MAX98373_R20B6_BDE_CUR_STATE_READBACK: + case MAX98373_R20FF_GLOBAL_SHDN: case MAX98373_R21FF_REV_ID: return true; default: diff --git a/sound/soc/codecs/max98373-sdw.c b/sound/soc/codecs/max98373-sdw.c index d8c47667a9ea..f3a12205cd48 100644 --- a/sound/soc/codecs/max98373-sdw.c +++ b/sound/soc/codecs/max98373-sdw.c @@ -220,6 +220,7 @@ static bool max98373_volatile_reg(struct device *dev, unsigned int reg) case MAX98373_R2054_MEAS_ADC_PVDD_CH_READBACK: case MAX98373_R2055_MEAS_ADC_THERM_CH_READBACK: case MAX98373_R20B6_BDE_CUR_STATE_READBACK: + case MAX98373_R20FF_GLOBAL_SHDN: case MAX98373_R21FF_REV_ID: /* SoundWire Control Port Registers */ case MAX98373_R0040_SCP_INIT_STAT_1 ... MAX98373_R0070_SCP_FRAME_CTLR: