Adds properties declared in the new DT bindings: - nxp,lpc3220-i2s.yaml - nxp,lpc3220-dmamux.yaml for dma router/mux and I2S interface.
Signed-off-by: Piotr Wojtaszczyk piotr.wojtaszczyk@timesys.com --- Changes for v4: - This patch is renamed from "ARM: dts: lpc32xx: Add missing properties for the i2s interfaces" to describe dma changes as well - Added dmas and dma-names properties in to all node which have dma request signals - Add bus properties to pl08x dma node since they are removed from platform data in phy3250.c - Put clock-controller@0 and dma-router@7c under the same syscon, simple-mfd device
Changes for v3: - Split previous commit for separate subsystems - Add properties to match dt binding
arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi | 53 +++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi index 974410918f35..c58dc127e59f 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi @@ -67,6 +67,8 @@ slc: flash@20020000 { reg = <0x20020000 0x1000>; clocks = <&clk LPC32XX_CLK_SLC>; status = "disabled"; + dmas = <&dma 1 1>; + dma-names = "rx-tx"; };
mlc: flash@200a8000 { @@ -75,6 +77,8 @@ mlc: flash@200a8000 { interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_MLC>; status = "disabled"; + dmas = <&dma 12 1>; + dma-names = "rx-tx"; };
dma: dma@31000000 { @@ -83,6 +87,13 @@ dma: dma@31000000 { interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_DMA>; clock-names = "apb_pclk"; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <16>; + lli-bus-interface-ahb1; + mem-bus-interface-ahb1; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; };
usb { @@ -182,6 +193,8 @@ ssp0: spi@20084000 { clock-names = "apb_pclk"; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmamux 14 1 1>, <&dmamux 15 1 1>; + dma-names = "rx", "tx"; status = "disabled"; };
@@ -191,6 +204,8 @@ spi1: spi@20088000 { clocks = <&clk LPC32XX_CLK_SPI1>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmamux 11 1 0>; + dma-names = "rx-tx"; status = "disabled"; };
@@ -206,6 +221,8 @@ ssp1: spi@2008c000 { clock-names = "apb_pclk"; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmamux 3 1 1>, <&dmamux 11 1 1>; + dma-names = "rx", "tx"; status = "disabled"; };
@@ -215,12 +232,19 @@ spi2: spi@20090000 { clocks = <&clk LPC32XX_CLK_SPI2>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmamux 3 1 0>; + dma-names = "rx-tx"; status = "disabled"; };
i2s0: i2s@20094000 { compatible = "nxp,lpc3220-i2s"; reg = <0x20094000 0x1000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_I2S0>; + dmas = <&dma 0 1>, <&dma 13 1>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; status = "disabled"; };
@@ -231,12 +255,19 @@ sd: sd@20098000 { <13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_SD>; clock-names = "apb_pclk"; + dmas = <&dma 4 1>; + dma-names = "rx"; status = "disabled"; };
i2s1: i2s@2009c000 { compatible = "nxp,lpc3220-i2s"; reg = <0x2009c000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_I2S1>; + dmas = <&dma 2 1>, <&dmamux 10 1 1>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; status = "disabled"; };
@@ -312,21 +343,27 @@ fab { compatible = "simple-bus"; ranges = <0x20000000 0x20000000 0x30000000>;
- /* System Control Block */ - scb { - compatible = "simple-bus"; - ranges = <0x0 0x40004000 0x00001000>; + syscon@40004000 { + compatible = "nxp,lpc3220-creg", "syscon", "simple-mfd"; + reg = <0x40004000 0x114>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x40004000 0x114>;
clk: clock-controller@0 { compatible = "nxp,lpc3220-clk"; reg = <0x00 0x114>; #clock-cells = <1>; - clocks = <&xtal_32k>, <&xtal>; clock-names = "xtal_32k", "xtal"; }; + + dmamux: dma-router@7c { + compatible = "nxp,lpc3220-dmamux"; + reg = <0x7c 0x8>; + #dma-cells = <3>; + dma-masters = <&dma>; + }; };
mic: interrupt-controller@40008000 { @@ -362,6 +399,8 @@ uart1: serial@40014000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 6 1>, <&dma 5 1>; + dma-names = "rx", "tx"; status = "disabled"; };
@@ -369,6 +408,8 @@ uart2: serial@40018000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 8 1>, <&dma 7 1>; + dma-names = "rx", "tx"; status = "disabled"; };
@@ -376,6 +417,8 @@ uart7: serial@4001c000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x4001c000 0x1000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux 10 1 0>, <&dma 9 1>; + dma-names = "rx", "tx"; status = "disabled"; };