Implement dsp lifecycle functions such as core RESET and STALL, SRAM power control and LP clock selection. This also adds functions for handling transport over DW DMA controller.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/intel/catpt/core.h | 34 ++++ sound/soc/intel/catpt/dsp.c | 334 +++++++++++++++++++++++++++++++++++ 2 files changed, 368 insertions(+)
diff --git a/sound/soc/intel/catpt/core.h b/sound/soc/intel/catpt/core.h index 6fc0378f9891..0f137e54b312 100644 --- a/sound/soc/intel/catpt/core.h +++ b/sound/soc/intel/catpt/core.h @@ -100,6 +100,10 @@ struct catpt_dev { struct resource dram; struct resource iram; struct resource *scratch; + + struct list_head stream_list; + spinlock_t list_lock; + struct mutex clk_mutex; };
int catpt_dmac_probe(struct catpt_dev *cdev); @@ -112,6 +116,16 @@ int catpt_dma_memcpy_fromdsp(struct catpt_dev *cdev, struct dma_chan *chan, dma_addr_t dst_addr, dma_addr_t src_addr, size_t size);
+void lpt_dsp_pll_shutdown(struct catpt_dev *cdev, bool enable); +void wpt_dsp_pll_shutdown(struct catpt_dev *cdev, bool enable); +int lpt_dsp_power_up(struct catpt_dev *cdev); +int lpt_dsp_power_down(struct catpt_dev *cdev); +int wpt_dsp_power_up(struct catpt_dev *cdev); +int wpt_dsp_power_down(struct catpt_dev *cdev); +int catpt_dsp_stall(struct catpt_dev *cdev, bool stall); +void catpt_dsp_update_srampge(struct catpt_dev *cdev, struct resource *sram, + unsigned long mask); +int catpt_dsp_update_lpclock(struct catpt_dev *cdev); irqreturn_t catpt_dsp_irq_handler(int irq, void *dev_id); irqreturn_t catpt_dsp_irq_thread(int irq, void *dev_id);
@@ -130,4 +144,24 @@ int catpt_dsp_send_msg(struct catpt_dev *cdev, struct catpt_ipc_msg request,
int catpt_coredump(struct catpt_dev *cdev);
+#include <sound/memalloc.h> +#include <uapi/sound/asound.h> + +struct snd_pcm_substream; +struct catpt_stream_template; + +struct catpt_stream_runtime { + struct snd_pcm_substream *substream; + + struct catpt_stream_template *template; + struct catpt_stream_info info; + struct resource *persistent; + struct snd_dma_buffer pgtbl; + + bool allocated; + bool prepared; + + struct list_head node; +}; + #endif diff --git a/sound/soc/intel/catpt/dsp.c b/sound/soc/intel/catpt/dsp.c index 24212e94737a..e50d34a1056e 100644 --- a/sound/soc/intel/catpt/dsp.c +++ b/sound/soc/intel/catpt/dsp.c @@ -8,7 +8,10 @@ #include <linux/devcoredump.h> #include <linux/dma-mapping.h> #include <linux/firmware.h> +#include <linux/pci.h> +#include <linux/pxa2xx_ssp.h> #include "core.h" +#include "messages.h" #include "registers.h"
static bool catpt_dma_filter(struct dma_chan *chan, void *param) @@ -139,6 +142,337 @@ void catpt_dmac_remove(struct catpt_dev *cdev) dw_dma_remove(cdev->dmac); }
+static void catpt_dsp_set_srampge(struct catpt_dev *cdev, struct resource *sram, + unsigned long mask, unsigned long new) +{ + unsigned long old; + u32 off = sram->start; + u32 b = __ffs(mask); + + old = catpt_readl_pci(cdev, VDRTCTL0) & mask; + dev_dbg(cdev->dev, "SRAMPGE [0x%08lx] 0x%08lx -> 0x%08lx", + mask, old, new); + + if (old == new) + return; + + catpt_updatel_pci(cdev, VDRTCTL0, mask, new); + /* wait for SRAM power gating to propagate */ + udelay(60); + + /* + * Dummy read as the very first access after block enable + * to prevent byte loss in future operations. + */ + for_each_clear_bit_from(b, &new, fls_long(mask)) { + u8 buf[4]; + + /* newly enabled: new bit=0 while old bit=1 */ + if (test_bit(b, &old)) { + dev_dbg(cdev->dev, "sanitize block %ld: off 0x%08x\n", + b - __ffs(mask), off); + memcpy_fromio(buf, cdev->lpe_ba + off, sizeof(buf)); + } + off += CATPT_MEMBLOCK_SIZE; + } +} + +void catpt_dsp_update_srampge(struct catpt_dev *cdev, struct resource *sram, + unsigned long mask) +{ + struct resource *res; + unsigned long new = 0; + + /* flag all busy blocks */ + for (res = sram->child; res; res = res->sibling) { + u32 h, l; + + h = (res->end - sram->start) / CATPT_MEMBLOCK_SIZE; + l = (res->start - sram->start) / CATPT_MEMBLOCK_SIZE; + new |= GENMASK(h, l); + } + + /* offset value given mask's start and invert it as ON=b0 */ + new = ~(new << __ffs(mask)) & mask; + + /* disable core clock gating */ + catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0); + + catpt_dsp_set_srampge(cdev, sram, mask, new); + + /* enable core clock gating */ + catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, + CATPT_VDRTCTL2_DCLCGE); +} + +int catpt_dsp_stall(struct catpt_dev *cdev, bool stall) +{ + u32 reg, val; + + val = stall ? CATPT_CS_STALL : 0; + catpt_updatel_shim(cdev, CS1, CATPT_CS_STALL, val); + + return catpt_readl_poll_shim(cdev, CS1, + reg, (reg & CATPT_CS_STALL) == val, + 500, 10000); +} + +static int catpt_dsp_reset(struct catpt_dev *cdev, bool reset) +{ + u32 reg, val; + + val = reset ? CATPT_CS_RST : 0; + catpt_updatel_shim(cdev, CS1, CATPT_CS_RST, val); + + return catpt_readl_poll_shim(cdev, CS1, + reg, (reg & CATPT_CS_RST) == val, + 500, 10000); +} + +void lpt_dsp_pll_shutdown(struct catpt_dev *cdev, bool enable) +{ + u32 val; + + val = enable ? LPT_VDRTCTL0_APLLSE : 0; + catpt_updatel_pci(cdev, VDRTCTL0, LPT_VDRTCTL0_APLLSE, val); +} + +void wpt_dsp_pll_shutdown(struct catpt_dev *cdev, bool enable) +{ + u32 val; + + val = enable ? WPT_VDRTCTL2_APLLSE : 0; + catpt_updatel_pci(cdev, VDRTCTL2, WPT_VDRTCTL2_APLLSE, val); +} + +static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti) +{ + u32 mask, reg, val; + int ret; + + mutex_lock(&cdev->clk_mutex); + + val = lp ? CATPT_CS_LPCS : 0; + reg = catpt_readl_shim(cdev, CS1) & CATPT_CS_LPCS; + dev_dbg(cdev->dev, "LPCS [0x%08lx] 0x%08x -> 0x%08x", + CATPT_CS_LPCS, reg, val); + + if (reg == val) { + mutex_unlock(&cdev->clk_mutex); + return 0; + } + + if (waiti) { + /* wait for DSP to signal WAIT state */ + ret = catpt_readl_poll_shim(cdev, ISD, + reg, (reg & CATPT_ISD_DCPWM), + 500, 10000); + if (ret) { + dev_err(cdev->dev, "await WAITI timeout\n"); + mutex_unlock(&cdev->clk_mutex); + return ret; + } + } + + ret = catpt_readl_poll_shim(cdev, CLKCTL, + reg, !(reg & CATPT_CLKCTL_CFCIP), + 500, 10000); + if (ret) + dev_warn(cdev->dev, "clock change still in progress\n"); + + /* default to DSP core & audio fabric high clock */ + val |= CATPT_CS_DCS_HIGH; + mask = CATPT_CS_LPCS | CATPT_CS_DCS; + catpt_updatel_shim(cdev, CS1, mask, val); + + ret = catpt_readl_poll_shim(cdev, CLKCTL, + reg, !(reg & CATPT_CLKCTL_CFCIP), + 500, 10000); + if (ret) + dev_warn(cdev->dev, "clock change still in progress\n"); + + /* update PLL accordingly */ + cdev->spec->pll_shutdown(cdev, lp); + + mutex_unlock(&cdev->clk_mutex); + return 0; +} + +int catpt_dsp_update_lpclock(struct catpt_dev *cdev) +{ + struct catpt_stream_runtime *stream; + + list_for_each_entry(stream, &cdev->stream_list, node) + if (stream->prepared) + return catpt_dsp_select_lpclock(cdev, false, true); + + return catpt_dsp_select_lpclock(cdev, true, true); +} + +/* bring registers to their defaults as HW won't reset itself */ +static void catpt_dsp_set_regs_defaults(struct catpt_dev *cdev) +{ + int i; + + catpt_writel_shim(cdev, CS1, CATPT_CS_DEFAULT); + catpt_writel_shim(cdev, ISC, CATPT_ISC_DEFAULT); + catpt_writel_shim(cdev, ISD, CATPT_ISD_DEFAULT); + catpt_writel_shim(cdev, IMC, CATPT_IMC_DEFAULT); + catpt_writel_shim(cdev, IMD, CATPT_IMD_DEFAULT); + catpt_writel_shim(cdev, IPCC, CATPT_IPCC_DEFAULT); + catpt_writel_shim(cdev, IPCD, CATPT_IPCD_DEFAULT); + catpt_writel_shim(cdev, CLKCTL, CATPT_CLKCTL_DEFAULT); + catpt_writel_shim(cdev, CS2, CATPT_CS2_DEFAULT); + catpt_writel_shim(cdev, LTRC, CATPT_LTRC_DEFAULT); + catpt_writel_shim(cdev, HMDC, CATPT_HMDC_DEFAULT); + + for (i = 0; i < CATPT_SSP_COUNT; i++) { + catpt_writel_ssp(cdev, i, SSCR0, CATPT_SSC0_DEFAULT); + catpt_writel_ssp(cdev, i, SSCR1, CATPT_SSC1_DEFAULT); + catpt_writel_ssp(cdev, i, SSSR, CATPT_SSS_DEFAULT); + catpt_writel_ssp(cdev, i, SSITR, CATPT_SSIT_DEFAULT); + catpt_writel_ssp(cdev, i, SSDR, CATPT_SSD_DEFAULT); + catpt_writel_ssp(cdev, i, SSTO, CATPT_SSTO_DEFAULT); + catpt_writel_ssp(cdev, i, SSPSP, CATPT_SSPSP_DEFAULT); + catpt_writel_ssp(cdev, i, SSTSA, CATPT_SSTSA_DEFAULT); + catpt_writel_ssp(cdev, i, SSRSA, CATPT_SSRSA_DEFAULT); + catpt_writel_ssp(cdev, i, SSTSS, CATPT_SSTSS_DEFAULT); + catpt_writel_ssp(cdev, i, SSCR2, CATPT_SSCR2_DEFAULT); + catpt_writel_ssp(cdev, i, SSPSP2, CATPT_SSPSP2_DEFAULT); + } +} + +int lpt_dsp_power_down(struct catpt_dev *cdev) +{ + catpt_dsp_reset(cdev, true); + + /* set 24Mhz clock for both SSPs */ + catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1), + CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1)); + catpt_dsp_select_lpclock(cdev, true, false); + + /* DRAM power gating all */ + catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, + cdev->spec->dram_mask); + catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, + cdev->spec->iram_mask); + + catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D3hot); + /* give hw time to drop off */ + udelay(50); + + return 0; +} + +int lpt_dsp_power_up(struct catpt_dev *cdev) +{ + /* SRAM power gating none */ + catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, 0); + catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, 0); + + catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D0); + /* give hw time to wake up */ + udelay(100); + + catpt_dsp_select_lpclock(cdev, false, false); + catpt_updatel_shim(cdev, CS1, + CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1), + CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1)); + /* stagger DSP reset after clock selection */ + udelay(50); + + catpt_dsp_reset(cdev, false); + /* generate int deassert msg to fix inversed int logic */ + catpt_updatel_shim(cdev, IMC, CATPT_IMC_IPCDB | CATPT_IMC_IPCCD, 0); + + return 0; +} + +int wpt_dsp_power_down(struct catpt_dev *cdev) +{ + u32 mask, val; + + /* disable core clock gating */ + catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0); + + catpt_dsp_reset(cdev, true); + /* set 24Mhz clock for both SSPs */ + catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1), + CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1)); + catpt_dsp_select_lpclock(cdev, true, false); + /* disable MCLK */ + catpt_updatel_shim(cdev, CLKCTL, CATPT_CLKCTL_SMOS, 0); + + catpt_dsp_set_regs_defaults(cdev); + + /* switch clock gating */ + mask = CATPT_VDRTCTL2_CGEALL & (~CATPT_VDRTCTL2_DCLCGE); + val = mask & (~CATPT_VDRTCTL2_DTCGE); + catpt_updatel_pci(cdev, VDRTCTL2, mask, val); + /* enable DTCGE separatelly */ + catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DTCGE, + CATPT_VDRTCTL2_DTCGE); + + /* SRAM power gating all */ + catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, + cdev->spec->dram_mask); + catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, + cdev->spec->iram_mask); + mask = WPT_VDRTCTL0_D3SRAMPGD | WPT_VDRTCTL0_D3PGD; + catpt_updatel_pci(cdev, VDRTCTL0, mask, WPT_VDRTCTL0_D3PGD); + + catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D3hot); + /* give hw time to drop off */ + udelay(50); + + /* enable core clock gating */ + catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, + CATPT_VDRTCTL2_DCLCGE); + udelay(50); + + return 0; +} + +int wpt_dsp_power_up(struct catpt_dev *cdev) +{ + u32 mask, val; + + /* disable core clock gating */ + catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0); + + /* switch clock gating */ + mask = CATPT_VDRTCTL2_CGEALL & (~CATPT_VDRTCTL2_DCLCGE); + val = mask & (~CATPT_VDRTCTL2_DTCGE); + catpt_updatel_pci(cdev, VDRTCTL2, mask, val); + + catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D0); + + /* SRAM power gating none */ + mask = WPT_VDRTCTL0_D3SRAMPGD | WPT_VDRTCTL0_D3PGD; + catpt_updatel_pci(cdev, VDRTCTL0, mask, mask); + catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, 0); + catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, 0); + + catpt_dsp_set_regs_defaults(cdev); + + /* restore MCLK */ + catpt_updatel_shim(cdev, CLKCTL, CATPT_CLKCTL_SMOS, CATPT_CLKCTL_SMOS); + catpt_dsp_select_lpclock(cdev, false, false); + /* set 24Mhz clock for both SSPs */ + catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1), + CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1)); + catpt_dsp_reset(cdev, false); + + /* enable core clock gating */ + catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, + CATPT_VDRTCTL2_DCLCGE); + + /* generate int deassert msg to fix inversed int logic */ + catpt_updatel_shim(cdev, IMC, CATPT_IMC_IPCDB | CATPT_IMC_IPCCD, 0); + + return 0; +} + #define CATPT_DUMP_MAGIC 0xcd42 #define CATPT_DUMP_SECTION_ID_FILE 0x00 #define CATPT_DUMP_SECTION_ID_IRAM 0x01