Am Montag 06 Juli 2009 08:26:11 schrieb Takashi Iwai:
At Sun, 5 Jul 2009 13:29:48 +0200,
Christian Esken wrote:
Am Sonntag 05 Juli 2009 09:44:33 schrieb Takashi Iwai:
At Sun, 5 Jul 2009 00:19:55 +0200,
Christian Esken wrote:
Am Samstag 27 Juni 2009 14:05:45 schrieb Christian Esken:
Hello,
unfortunately I cannot playback anything (PCM) with the new SB X-Fi driver. Driver: ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa- driver-snapshot.tar.bz2 Distribution: openSuSE 11.1 Kernel: 2.6.27.23-0.1-xen
My card is a "X-Fi Titanium" (PCI device code: 1102:000b). The card is recognized by the driver, and any mixer (alsamixer, kmix) also recognizes the card.
But playing back isn't possible. I tried speaker-test, audacity, amarok and aplay. Most applications hang, some also produce an error in the /var/log/messages (see below).
I then used "./configure --with-debug=full --with-cards=ctxfi" due to the possible hd-audio conflict, but it didn't make a difference.
Is there anything else I could try?
I tested the same openSuSE version with a non-Xen 64 bit kernel, and it doesn't work either.
And I tried with this: Driver: alsa-driver-20090704.tar.bz2 Distribution: Kubuntu Karmic Alpha-2 Kernel: 2.6.30 (32 Bit)
Under the latter setup the X-Fi Titanium works (Simple 2 channel test with speaker-test, audacity, amarok). :-))
How many RAM do you have? Could you boot with the limited memory size?
It is just 2GB. So I am not limited by the 32 bit barrier.
So booting with "limited" memory size doesn't make sense, right?
Supposedly. Is it emu20k1 or emu20k2?
I checked it again: It is a 20k2 chip.
/var/log/boot.msg says: <7>ALSA /home/chris/Desktop/alsa-driver/pci/ctxfi/ctatc.c:1268: ctxfi: chip 20K2 model SB0880 (1102:0041) is found
http://pci-ids.ucw.cz/mods/PC/1102/000b shows 1102:0041 as "X-Fi Titanium series [EMU20k2]".
Christian