The endianness flag should have been removed when the driver was ported across from having both a CODEC and CPU side component, to just having a CPU component and using the dummy for the CODEC. The endianness flag is used to indicate that the device is completely ambivalent to the endianness of the data, typically due to the endianness being lost over the hardware link (ie. the link defines bit ordering). It's usage didn't have any effect when the driver had both a CPU and CODEC component, since the union of those equals the CPU side settings, but now causes the driver to falsely report it supports big endian. Correct this by removing the flag.
Fixes: f3c668074a04 ("ASoC: atmel-pdmic: remove codec component") Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com --- sound/soc/atmel/atmel-pdmic.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/sound/soc/atmel/atmel-pdmic.c b/sound/soc/atmel/atmel-pdmic.c index 42117de299e74..ea34efac2fff5 100644 --- a/sound/soc/atmel/atmel-pdmic.c +++ b/sound/soc/atmel/atmel-pdmic.c @@ -481,7 +481,6 @@ static const struct snd_soc_component_driver atmel_pdmic_cpu_dai_component = { .num_controls = ARRAY_SIZE(atmel_pdmic_snd_controls), .idle_bias_on = 1, .use_pmdown_time = 1, - .endianness = 1, };
/* ASoC sound card */