At Tue, 17 Sep 2013 12:51:59 -0700, Adam Williamson wrote:
On Wed, 2013-07-17 at 09:49 +0200, Takashi Iwai wrote:
echo "multi_io = no"
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/hints
echo "1"
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/reconfigure
http://www.alsa-project.org/db/?f=8494525c7988dc528a45cc1e45134666f3793d7a
< Master > Headphone Speaker Mic Mic Boost Mic 1 Mic Boost 1 Beep Auto-Mute Mode Enabled
AT THIS POINT IT WORKED !
But not automatically though ?! I have to manually put in the hint.
Hm, so something clears the flag again (or prevents the flag working). Could you try to figure out when and where no_multi_io flag is set and cleared, e.g. by adding printk()s in the code path?
So it looks like things stalled a bit here; if you still need info from someone with an affected system I can try and do it, but you might need to walk me through it / provide patches a bit more than the above, as I'm just a dumb qa monkey :) If you can make it a bit more 'tab a, slot b' I'll try and do the testing. Thanks!
Could you just try 3.12-rc1?
Takashi