Hi!
Basically the idea is to move the I2C device instantiation from the codec drivers (onyx, tas) to the I2C adapter driver (i2c-powermac.) This follows the Linux device driver model, requires slightly less code, runs faster and and lets the required chip drivers be loaded by udev or similar automatically.
Sounds weird -- how do you handle codecs that could be on different buses? This seems to imply that any probing may potentially need to be duplicated across any bus driver they could possibly connected to. But that's not really relevant to this patch.
The last driver to convert, keywest, is a mystery to me. I have a hard time understanding how it interacts with tumbler and daca. I have the feeling that it is essentially a glue module to workaround the legacy i2c model limitations, so probably it could go away entirely now, but I'm not sure how to do that in practice. Maybe tumbler and daca would be made separate i2c drivers, I'm not sure.
Sorry, I'm not familiar with this code.
One thing in particular which I find strange is that tumbler has references to the TAS3004 device, much like the tas codec driver. It is unclear to me whether tas is a replacement for tumbler, or if both drivers work together, or if they are for separate hardware. I would appreciate clarifications about this.
Well... tumbler also drives the very similar tas3001 codec.
However, I need to start with a little more background.
Apple machines can contain various codecs, for example the tas3004, which has various outputs. Due to the way Apple wires up the codec, you need platform fabric to identify which outputs are connected where, cf. sound/aoa/fabrics/layout.c. Note all machines have line-in for instance.
The aoa driver, which I wrote, currently supports only i2s buses for actually transferring data, but I think there are some other ways to get data to the codec -- I'm not too familiar with the old machines.
Now, aoa will currently automatically load from the layout fabric module, and then pull in the modules for the codecs it _knows_ to be present on the bus. Therefore, it seems that your patch makes things less efficient because you probe for all those codecs, and there's no machine that has all of them. The aoa fabric only loads the modules for those it knows to be present, and they then probe (and in reality the probing never fails because they really are there).
Now, since aoa needs information on how the entire system is glued together (the fabric I was talking about with the line-in example), it has to infer that from platform data, in this case the device tree. Because I do not have any older machines, am lazy and snd-powermac works for the old machines, snd-powermac with its "tumbler" is a driver for the same tas3004 codec, but on a different, older, fabric.
Once upon a time the plan was to get rid of snd-powermac entirely and port all its functionality into subdrivers of aoa, but that clearly never happened. No fairy-tale happy ending here, quite obviously.
Now, looking at your patch, I think it will break snd-powermac. See, if snd_aoa_codec_tas is automatically loaded on a system with an _old_ fabric that aoa knows nothing about, snd-powermac can no longer be loaded. (Incidentally, snd-powermac cannot be auto-loaded at all currently, while aoa can via the fabric driver's device-tree binding)
Therefore, probing the codecs in i2c-powermac and automatically loading the corresponding aoa module will break sound on old machines.
I would think that if you removed the MODULE_DEVICE_TABLE from your patch, it may continue to work because the aoa fabric driver loads the modules as before, and on old machines nothing loads automatically and snd-powermac can be loaded manually.
However, it will still be less efficient because you will be probing _all_ those codecs, notably the tas family, even on machines that are known to not have it (machines that have onyx). Putting that mutual exclusion information into i2c-powermac would be misplaced, imho.
Note also that there's one more codec (topaz) which isn't currently supported.
In conclusion, I think that the old/existing/legacy i2c binding model was much better suited to platform knowledge about the way machines are put together, and the new code is, as far as I can tell, less efficient -- contrary to your assertion.
Since I'm away from all machines I could test this with I have no data on any that or the module device table thing I pointed out for now.
Anyway, some more technical comments on your patch: * I realise you just copied things around but it would be nice to clean up the coding style, especially comment style, a little while at it. (yeah, it's my fault)
* aoa_codec_* is the module name, I see no reason to use that as the i2c name, that should be the codec's name instead (aka pcm3052 etc)
johannes