2012-7-27 下午4:40 於 "Florian Reitmeir" florian@reitmeir.org 寫道
i own an HP Z400 Workstation, and audio is not working as expected.
The Problem:
- if i mute the internal speaker, the sound for line out is also muted
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c0171...
The internal speaker will be disabled if multi-streaming audio is enabled.
Refer to alc262 specification
Two stereo DACs support 16/20/24-bit PCM format for stereo audio playback on the rear panel, plus 2 channels of independent stereo sound output (multiple streaming) through the Front-Out-Left and Front-Out-Right channels
Supports MONO line output with independent volume control
- pulse audio, detects the internal speaker as master, so if if use the
volume control in gnome 3, line-out gets muted, and the internal speaker is used
the auto parser of hda codec does not differentitate those internal chassis mono speaker of the desktop (cfg->mono_out_pin) from those speaker of laptop (cfg->speaker_outs)
this also cause some lenovo workstation with ad1988 codec fail as the driver try to assign the fifth dac to the mono speaker instead of the headphone.
- to hear something on line-out i use alsamixer, and control the volume
of the "speaker" output to 0
- but even if i set the output of speaker to 0, i can hear the music very
very silent..
- and last .. the control of "line" does nothing, mute/volume does not
affect the output
a possible way is use node 0x02 for line out and mono speaker , node 0x03 for the headphone.
front playback volume use node 0x0c 's amp-out headphone playback volume use node 0x0d 's amp-out mono speaker volume use node 0x0e 's amp-out
the mono speaker playback switch cannot be the slave of virtual master.
the mono speaker should be muted when either line out or headphone is plugged.
Here some hardware info, if you need more, please tell me.
cat /proc/asound/card0/codec#0
Codec: Realtek ALC262 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0262 Subsystem Id: 0x103c1309 Revision Id: 0x100202 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x11: Stereo Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo Device: name="ALC262 Analog", type="Audio", device=0 Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x01 0x01] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Control: name="PCM Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1d 0x1d] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00] Connection: 2 0x02 0x0b
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Control: name="PCM Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Line Out Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000003e: IN OUT HP Detect Trigger Pin Default 0x01014c10: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=02, enabled=1 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x00000010: OUT Pin Default 0x99030120: [Fixed] Line Out at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x0e
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Headphone Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000173e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 Pin Default 0x02211c40: [Jack] HP Out at Ext Front Conn = 1/8, Color = Black DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=01, enabled=1 Connection: 2 0x0c 0x0d*