Re: [alsa-devel] wrong decibel data?

'Twas brillig, and Raymond Yau at 14/06/10 01:25 did gyre and gimble:

if your sound card have ac97 codec ., you can use audacity to record the output from hw:0,0 and you will see clipping occur when you set "PCM" volume above 0dB

So the standard response is "don't do that then" :)

That's why the base volume is shown to the user via GUIs so that they can gauge the best point on the slider to use. Currently there is no indication with alsa sliders at which point the 0dB "sweet spot" lies.

IMO this is a good improvement for usability.

Col