If the LRCLK is shared and the WM8960 is clock master then we should enable the LRCM bit to tell the device that it should drive LRCLK when either ADC or DAC is enabled rather than separately driving the two LRCLKs.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- include/sound/wm8960.h | 2 ++ sound/soc/codecs/wm8960.c | 11 +++++++++++ 2 files changed, 13 insertions(+)
diff --git a/include/sound/wm8960.h b/include/sound/wm8960.h index 74e9a95..b5a1ab9e 100644 --- a/include/sound/wm8960.h +++ b/include/sound/wm8960.h @@ -19,6 +19,8 @@ struct wm8960_data { bool capless; /* Headphone outputs configured in capless mode */
int dres; /* Discharge resistance for headphone outputs */ + + bool shared_lrclk; /* DAC and ADC LRCLKs are wired together */ };
#endif diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 7cb0d07c..8740423 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -1029,6 +1029,7 @@ static const struct regmap_config wm8960_regmap = { static __devinit int wm8960_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + struct wm8960_data *pdata = dev_get_platdata(&i2c->dev); struct wm8960_priv *wm8960; int ret;
@@ -1041,6 +1042,16 @@ static __devinit int wm8960_i2c_probe(struct i2c_client *i2c, if (IS_ERR(wm8960->regmap)) return PTR_ERR(wm8960->regmap);
+ if (pdata && pdata->shared_lrclk) { + ret = regmap_update_bits(wm8960->regmap, WM8960_ADDCTL2, + 0x4, 0x4); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to enable LRCM: %d\n", + ret); + return ret; + } + } + i2c_set_clientdata(i2c, wm8960);
ret = snd_soc_register_codec(&i2c->dev,