On Wed, Sep 09, 2015 at 01:02:06PM +0100, Charles Keepax wrote:
On Wed, Sep 09, 2015 at 07:29:11PM +0800, Zidan Wang wrote:
The input PGAs have a gain range from -17.25dB to +30dB in 0.75dB steps.
The boost stage can provide additional gain. For line inputs, -12dB to +6dB gain is available on the boost mixer. For micphone inputs, it can provide up to +29dB additional gain from the microphone PGA.
Signed-off-by: Zidan Wang zidan.wang@freescale.com
sound/soc/codecs/wm8960.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 6163474..6975390 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -212,27 +212,37 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol, }
static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1); +static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1725, 75, 0); static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1); static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0); static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); -static const DECLARE_TLV_DB_SCALE(boost_tlv, -1500, 300, 1); +static const DECLARE_TLV_DB_SCALE(lineinboost_tlv, -1500, 300, 1); +static const unsigned int micboost_tlv[] = {
- TLV_DB_RANGE_HEAD(2),
- 0, 1, TLV_DB_SCALE_ITEM(0, 1300, 0),
- 2, 3, TLV_DB_SCALE_ITEM(2000, 900, 0),
+};
static const struct snd_kcontrol_new wm8960_snd_controls[] = { SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL,
0, 63, 0, adc_tlv),
0, 63, 0, inpga_tlv),This would make adc_tlv unused so you should probably remove it.
Although looking at this, it does looks a bit to me like the registers are just specified wrong here and this was intended to be the ADC volumes rather than the PGA volumes. In which case the current TLV would be correct, the registers should be correct and a new control should be added if you need to use the PGA volume.
Thanks, Charles
adc_tlv is used for "ADC PCM Capture Volume", so i can't remove it. SOC_DOUBLE_R_TLV("ADC PCM Capture Volume", WM8960_LADC, WM8960_RADC, 0, 255, 0, adc_tlv),
Best Regards, Zidan Wang
SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL, 6, 1, 0), SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL, 7, 1, 0),
SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume",
WM8960_INBMIX1, 4, 7, 0, boost_tlv),
WM8960_INBMIX1, 4, 7, 0, lineinboost_tlv),SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume",
WM8960_INBMIX1, 1, 7, 0, boost_tlv),
WM8960_INBMIX1, 1, 7, 0, lineinboost_tlv),SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume",
WM8960_INBMIX2, 4, 7, 0, boost_tlv),
WM8960_INBMIX2, 4, 7, 0, lineinboost_tlv),SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume",
WM8960_INBMIX2, 1, 7, 0, boost_tlv),
WM8960_INBMIX2, 1, 7, 0, lineinboost_tlv),+SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT1 Volume",
WM8960_RINPATH, 4, 4, 0, micboost_tlv),+SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT1 Volume",
WM8960_LINPATH, 4, 4, 0, micboost_tlv),SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC, 0, 255, 0, dac_tlv), -- 1.9.1