From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
commit 014f07ca1cb12 ("ASoC: fsl: imx-spdif: don't select unnecessary Platform")
Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name.
In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch.
Fixes: commit 014f07ca1cb12 ("ASoC: fsl: imx-spdif: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com --- sound/soc/fsl/imx-spdif.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/fsl/imx-spdif.c b/sound/soc/fsl/imx-spdif.c index 393c5a3..6c4dadf 100644 --- a/sound/soc/fsl/imx-spdif.c +++ b/sound/soc/fsl/imx-spdif.c @@ -26,7 +26,7 @@ static int imx_spdif_audio_probe(struct platform_device *pdev) }
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); - comp = devm_kzalloc(&pdev->dev, 2 * sizeof(*comp), GFP_KERNEL); + comp = devm_kzalloc(&pdev->dev, 3 * sizeof(*comp), GFP_KERNEL); if (!data || !comp) { ret = -ENOMEM; goto end; @@ -34,15 +34,18 @@ static int imx_spdif_audio_probe(struct platform_device *pdev)
data->dai.cpus = &comp[0]; data->dai.codecs = &comp[1]; + data->dai.platforms = &comp[2];
data->dai.num_cpus = 1; data->dai.num_codecs = 1; + data->dai.num_platforms = 1;
data->dai.name = "S/PDIF PCM"; data->dai.stream_name = "S/PDIF PCM"; data->dai.codecs->dai_name = "snd-soc-dummy-dai"; data->dai.codecs->name = "snd-soc-dummy"; data->dai.cpus->of_node = spdif_np; + data->dai.platforms->of_node = spdif_np; data->dai.playback_only = true; data->dai.capture_only = true;