At Thu, 5 Jan 2012 22:01:58 +0100, pavel.hofman@ivitera.com wrote:
From: Pavel Hofman pavel.hofman@ivitera.com
This card shares PCI ids with Chaintec AV710. Therefore, it will not be detected automatically, it can only be activated by the module parameter model=sq210a.
Hrm, that's bad. Do you know any other way to identify the device?
Takashi
Signed-off-by: Pavel Hofman pavel.hofman@ivitera.com
diff --git a/pci/ice1712/ice1724.c b/pci/ice1712/ice1724.c index 8c473b1..248ad31 100644 --- a/pci/ice1712/ice1724.c +++ b/pci/ice1712/ice1724.c @@ -2182,6 +2182,40 @@ static struct snd_kcontrol_new snd_vt1724_mixer_pro_peak __devinitdata = {
static struct snd_ice1712_card_info no_matched __devinitdata;
+/*
- ooAoo cards with no controls
+*/ +static unsigned char ooaoo_sq210_eeprom[] __devinitdata = {
- [ICE_EEP2_SYSCONF] = 0x4c, /* 49MHz crystal, no mpu401, no ADC,
1xDACs */- [ICE_EEP2_ACLINK] = 0x80, /* I2S */
- [ICE_EEP2_I2S] = 0x78, /* no volume, 96k, 24bit, 192k */
- [ICE_EEP2_SPDIF] = 0xc1, /* out-en, out-int, out-ext */
- [ICE_EEP2_GPIO_DIR] = 0x00, /* no GPIOs are used */
- [ICE_EEP2_GPIO_DIR1] = 0x00,
- [ICE_EEP2_GPIO_DIR2] = 0x00,
- [ICE_EEP2_GPIO_MASK] = 0xff,
- [ICE_EEP2_GPIO_MASK1] = 0xff,
- [ICE_EEP2_GPIO_MASK2] = 0xff,
- [ICE_EEP2_GPIO_STATE] = 0x00, /* inputs */
- [ICE_EEP2_GPIO_STATE1] = 0x00, /* all 1, but GPIO_CPLD_RW
and GPIO15 always zero */- [ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */
+};
+struct snd_ice1712_card_info snd_vt1724_ooaoo_cards[] __devinitdata = {
- {
.name = "ooAoo SQ210a",.model = "sq210a",.eeprom_size = sizeof(ooaoo_sq210_eeprom),.eeprom_data = ooaoo_sq210_eeprom,- },
- { } /* terminator */
+};
static struct snd_ice1712_card_info *card_tables[] __devinitdata = { snd_vt1724_revo_cards, snd_vt1724_amp_cards, @@ -2196,6 +2230,7 @@ static struct snd_ice1712_card_info *card_tables[] __devinitdata = { snd_vt1724_wtm_cards, snd_vt1724_se_cards, snd_vt1724_qtet_cards,
- snd_vt1724_ooaoo_cards, NULL,
};
-- 1.7.0.4