This was initially copied from the Midas DTSI, but there is no proof that the same interrupt is also used on the Tab 3. The pin listed as the interrupt here is GPIO_HDMI_CEC on the Midas, but for the Tab 3 it is the headset button GPIO - GPIO_EAR_SEND_END.
Drop the interrupt, since there is no proof that it is used.
Signed-off-by: Artur Weber aweber.kernel@gmail.com --- Changes in v3: - Split out from "[PATCH v2 7/7] ARM: dts: samsung: exynos4212-tab3: Fix up wm1811 codec config" --- arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi index 47e9a230f2e8..20e5e7ba6b92 100644 --- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi @@ -534,8 +534,6 @@ wm1811: audio-codec@1a { clock-names = "MCLK1", "MCLK2"; interrupt-controller; #interrupt-cells = <2>; - interrupt-parent = <&gpx3>; - interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller; #gpio-cells = <2>;