Hi,
here is the output from alsa-info.sh
http://www.alsa-project.org/db/?f=8282910dc807e1f141896886cd5f8fd574117000
I found another small mistake. In the Mixer my Soundcard is shown as "Realtek ALC888". When i switch this to lines in patch_realtek.c then it is shown as "Realtek ALC1200".
static struct hda_codec_preset snd_hda_preset_realtek[] = { ......
{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", .patch = patch_alc883 },
.....
Thomas
Am 25.12.2008 05:31, schrieb Wu Fengguang:
Hi Thomas,
Could you provide more information by running http://www.alsa-project.org/alsa-info.sh
I'm particularity interested in the full dmesg and contents of /proc/asound/card?/*#?
Thanks, Fengguang
On Tue, Dec 23, 2008 at 12:22:29PM +0100, Thomas Schneider wrote:
Hi,
i am looking for a way to make Digital-Audio work with the external and internal S/PDIF-Output of my Motherboard Asus M3A-H/HDMI with ALC1200 Soundard. I use the latest unstable snapshot and i can´t make it work at the same time.
On the external S/PDIF-Output is my Digital Receiver connected, on the internal one my GeForce 8500GT to get sound over HDMI on my LCT-TV.
When i load the driver without any model-options my Soundcard is detected as Asus P5Q-EM HDMI
ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:2716: hda_codec: model 'asus-p5q' is selected for config 1043:82fe (Asus P5Q-EM HDMI) [ 6.721700] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Headphone Playback Volume, skipped [ 6.721714] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Speaker Playback Volume, skipped [ 6.721716] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Mono Playback Volume, skipped [ 6.721719] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Line-Out Playback Volume, skipped [ 6.721721] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave PCM Playback Volume, skipped [ 6.721729] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Speaker Playback Switch, skipped [ 6.721731] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Mono Playback Switch, skipped
Now i have sound on my LCD-TV over HDMI (internal S/PDIF-Out)
When i load the driver with model=6stack-dig i have sound on my Digital-Receiver (external S/PDIF-Out).
In the mailinglist-archive or in the doku i have seen, that the only difference between this models is the DIGOUT_NID
asus-p5q = 0x10 6stack-dig = 0x06
I there a way to get both output to work at the same time so i have sound on my LCD-TV and my Digital-Receiver ?
Regards
Thomas _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel