Hi Daniel,
Smatch complains about a potential read past the end of the array in build_feature_ctl().
sound/usb/mixer.c +1035 build_feature_ctl(34) error: buffer overflow 'audio_feature_info' 13 <= 14
This is in the init code so probably it's correct, and I've just missed how it works. Can you take a look?
The problem is that audio_feature_info[] has 13 elements, but Smatch thinks control - 1 can go up to 14 so we're two elements past the end.
1035 cval->val_type = audio_feature_info[control-1].type;
Smatch get the value for "control" from "i" in parse_audio_feature_unit().
sound/usb/mixer.c 1261 } else { /* UAC_VERSION_2 */ 1262 for (i = 0; i < 30/2; i++) { 1263 unsigned int ch_bits = 0; 1264 unsigned int ch_read_only = 0; 1265 1266 for (j = 0; j < channels; j++) { 1267 unsigned int mask = snd_usb_combine_bytes(bmaControls + csize * (j+1), csize); 1268 if (uac2_control_is_readable(mask, i)) { 1269 ch_bits |= (1 << j); 1270 if (!uac2_control_is_writeable(mask, i)) 1271 ch_read_only |= (1 << j); 1272 } 1273 } 1274 1275 /* NOTE: build_feature_ctl() will mark the control read-only if all channels 1276 * are marked read-only in the descriptors. Otherwise, the control will be 1277 * reported as writeable, but the driver will not actually issue a write 1278 * command for read-only channels */ 1279 if (ch_bits & 1) /* the first channel must be set (for ease of programming) */ 1280 build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, ch_read_only); ^ "i" can be 13 here.
1281 if (uac2_control_is_readable(master_bits, i)) 1282 build_feature_ctl(state, _ftr, 0, i, &iterm, unitid, ^ "i" maybe can go up to 14 here, I'm not sure.
1283 !uac2_control_is_writeable(master_bits, i)); 1284 } 1285 }
regards, dan carpenter