On 06/14/2013 05:20 PM, Wang Xingchao wrote:
when user open HDMI device 3/7/8, if it has no physical device connected, return error.
This patch will cause regressions in two big use cases:
1) Older chipsets (at least from non-Intel vendors) might not support correct ELD reporting. Thus this will cause HDMI audio to stop working there.
2) In PulseAudio's current design, PulseAudio probes the device at startup and caches the result. Unfortunately, there is no reprobing at plug/unplug, so if the monitor is hotplugged, it will not work unless PulseAudio is restarted afterwards.
The bug is from Haswell platform, All pins choose converter 0 by default in hardware level, maybe only pin 1 had valid monitor connected. if user play audio on pin 0/2, pin 1 can get audio data too.
Signed-off-by: Wang Xingchao xingchao.wang@linux.intel.com
sound/pci/hda/patch_hdmi.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 8db5eb6..d766f40 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1139,6 +1139,9 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, per_pin = get_pin(spec, pin_idx); eld = &per_pin->sink_eld;
- if (!eld->monitor_present || !eld->eld_valid)
return -EIO;- if (codec->vendor_id == 0x80862807) hsw_verify_cvt_D0(spec, codec);