From: Mathias Nyman mathias.nyman@linux.intel.com
Modify the XHCI drivers to accommodate for handling multiple event rings in case there are multiple interrupters. Add the required APIs so clients are able to allocate/request for an interrupter ring, and pass this information back to the client driver. This allows for users to handle the resource accordingly, such as passing the event ring base address to an audio DSP. There is no actual support for multiple MSI/MSI-X vectors.
Factoring out XHCI interrupter APIs and structures done by Wesley Cheng, in order to allow for USB class drivers to utilze them.
Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Co-developed-by: Wesley Cheng quic_wcheng@quicinc.com Signed-off-by: Wesley Cheng quic_wcheng@quicinc.com --- arch/arm64/boot/dts/qcom/sm8350.dtsi.rej | 14 ++++ arch/arm64/configs/defconfig.rej | 24 ++++++ drivers/usb/host/xhci-debugfs.c | 2 +- drivers/usb/host/xhci-mem.c | 93 ++++++++++++++++++++++-- drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.c | 49 ++++++++----- drivers/usb/host/xhci.h | 77 +------------------- include/linux/usb/xhci-intr.h | 86 ++++++++++++++++++++++ 8 files changed, 245 insertions(+), 102 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi.rej create mode 100644 arch/arm64/configs/defconfig.rej create mode 100644 include/linux/usb/xhci-intr.h
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi.rej b/arch/arm64/boot/dts/qcom/sm8350.dtsi.rej new file mode 100644 index 000000000000..e96ef1120160 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi.rej @@ -0,0 +1,14 @@ +--- arch/arm64/boot/dts/qcom/sm8350.dtsi ++++ arch/arm64/boot/dts/qcom/sm8350.dtsi +@@ -2254,9 +2254,9 @@ + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; +- phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; ++ phys = <&usb_1_hsphy>, <&usb_1_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; +- ++ dr_mode = "host"; + ports { + #address-cells = <1>; + #size-cells = <0>; diff --git a/arch/arm64/configs/defconfig.rej b/arch/arm64/configs/defconfig.rej new file mode 100644 index 000000000000..c98a9b0e8290 --- /dev/null +++ b/arch/arm64/configs/defconfig.rej @@ -0,0 +1,24 @@ +--- arch/arm64/configs/defconfig ++++ arch/arm64/configs/defconfig +@@ -241,7 +210,7 @@ CONFIG_BLK_DEV_NBD=m + CONFIG_VIRTIO_BLK=y + CONFIG_BLK_DEV_NVME=m + CONFIG_QCOM_COINCELL=m +-CONFIG_QCOM_FASTRPC=m ++CONFIG_QCOM_FASTRPC=y + CONFIG_SRAM=y + CONFIG_PCI_ENDPOINT_TEST=m + CONFIG_EEPROM_AT24=m +@@ -1254,10 +1204,10 @@ CONFIG_PHY_MVEBU_CP110_COMPHY=y + CONFIG_PHY_MTK_TPHY=y + CONFIG_PHY_QCOM_EDP=m + CONFIG_PHY_QCOM_PCIE2=m +-CONFIG_PHY_QCOM_QMP=m ++CONFIG_PHY_QCOM_QMP=y + CONFIG_PHY_QCOM_QUSB2=m + CONFIG_PHY_QCOM_USB_HS=m +-CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m ++CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y + CONFIG_PHY_QCOM_USB_HS_28NM=m + CONFIG_PHY_QCOM_USB_SS=m + CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index 99baa60ef50f..15a8402ee8a1 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -693,7 +693,7 @@ void xhci_debugfs_init(struct xhci_hcd *xhci) "command-ring", xhci->debugfs_root);
- xhci_debugfs_create_ring_dir(xhci, &xhci->interrupter->event_ring, + xhci_debugfs_create_ring_dir(xhci, &xhci->interrupters[0]->event_ring, "event-ring", xhci->debugfs_root);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 19a402123de0..c51150af22f2 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1840,6 +1840,26 @@ xhci_free_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir) kfree(ir); }
+void xhci_remove_secondary_interrupter(struct usb_hcd *hcd, struct xhci_interrupter *ir) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + unsigned int intr_num; + + /* interrupter 0 is primary interrupter, don't touch it */ + if (!ir || !ir->intr_num || ir->intr_num >= xhci->max_interrupters) { + xhci_dbg(xhci, "Invalid secondary interrupter, can't remove\n"); + return; + } + + /* fixme, should we check xhci->interrupter[intr_num] == ir */ + spin_lock(&xhci->lock); + intr_num = ir->intr_num; + xhci_free_interrupter(xhci, ir); + xhci->interrupters[intr_num] = NULL; + spin_unlock(&xhci->lock); +} +EXPORT_SYMBOL_GPL(xhci_remove_secondary_interrupter); + void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct device *dev = xhci_to_hcd(xhci)->self.sysdev; @@ -1847,9 +1867,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
cancel_delayed_work_sync(&xhci->cmd_timer);
- xhci_free_interrupter(xhci, xhci->interrupter); - xhci->interrupter = NULL; - xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed primary event ring"); + for (i = 0; i < xhci->max_interrupters; i++) { + if (xhci->interrupters[i]) { + xhci_free_interrupter(xhci, xhci->interrupters[i]); + xhci->interrupters[i] = NULL; + } + } + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed interrupters");
if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); @@ -1919,6 +1943,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) for (i = 0; i < xhci->num_port_caps; i++) kfree(xhci->port_caps[i].psi); kfree(xhci->port_caps); + kfree(xhci->interrupters); xhci->num_port_caps = 0;
xhci->usb2_rhub.ports = NULL; @@ -1927,6 +1952,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->rh_bw = NULL; xhci->ext_caps = NULL; xhci->port_caps = NULL; + xhci->interrupters = NULL;
xhci->page_size = 0; xhci->page_shift = 0; @@ -2279,6 +2305,13 @@ xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir, return -EINVAL; }
+ if (xhci->interrupters[intr_num]) { + xhci_warn(xhci, "Interrupter %d\n already set up", intr_num); + return -EINVAL; + } + + xhci->interrupters[intr_num] = ir; + ir->intr_num = intr_num; ir->ir_set = &xhci->run_regs->ir_set[intr_num];
/* set ERST count with the number of entries in the segment table */ @@ -2298,10 +2331,53 @@ xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir, return 0; }
+struct xhci_interrupter * +xhci_create_secondary_interrupter(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_interrupter *ir; + unsigned int i; + int err = -ENOSPC; + + if (!xhci->interrupters) + return NULL; + + ir = xhci_alloc_interrupter(xhci, GFP_KERNEL); + if (!ir) + return NULL; + + spin_lock_irq(&xhci->lock); + + /* Find available secondary interrupter, interrupter 0 is reserverd for primary */ + for (i = 1; i < xhci->max_interrupters; i++) { + if (xhci->interrupters[i] == NULL) { + err = xhci_add_interrupter(xhci, ir, i); + break; + } + } + + spin_unlock_irq(&xhci->lock); + + if (!err) { + xhci_dbg(xhci, "Add secondary interrupter %d, max interrupters %d\n", + i, xhci->max_interrupters); + return ir; + } + + xhci_warn(xhci, "Failed to add secondary interrupter, max interrupters %d\n", + xhci->max_interrupters); + + xhci_free_interrupter(xhci, ir); + + return NULL; +} +EXPORT_SYMBOL_GPL(xhci_create_secondary_interrupter); + int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) { - dma_addr_t dma; + struct xhci_interrupter *ir; struct device *dev = xhci_to_hcd(xhci)->self.sysdev; + dma_addr_t dma; unsigned int val, val2; u64 val_64; u32 page_size, temp; @@ -2425,11 +2501,14 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* Allocate and set up primary interrupter 0 with an event ring. */ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Allocating primary event ring"); - xhci->interrupter = xhci_alloc_interrupter(xhci, flags); - if (!xhci->interrupter) + xhci->interrupters = kcalloc_node(xhci->max_interrupters, sizeof(*xhci->interrupters), + flags, dev_to_node(dev)); + + ir = xhci_alloc_interrupter(xhci, flags); + if (!ir) goto fail;
- if (xhci_add_interrupter(xhci, xhci->interrupter, 0)) + if (xhci_add_interrupter(xhci, ir, 0)) goto fail;
xhci->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 646ff125def5..56f45408dc0c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3097,7 +3097,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) writel(status, &xhci->op_regs->status);
/* This is the handler of the primary interrupter */ - ir = xhci->interrupter; + ir = xhci->interrupters[0]; if (!hcd->msi_enabled) { u32 irq_pending; irq_pending = readl(&ir->ir_set->irq_pending); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5b73a7d281ed..58d75b412bad 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -456,7 +456,7 @@ static int xhci_init(struct usb_hcd *hcd)
static int xhci_run_finished(struct xhci_hcd *xhci) { - struct xhci_interrupter *ir = xhci->interrupter; + struct xhci_interrupter *ir = xhci->interrupters[0]; unsigned long flags; u32 temp;
@@ -508,7 +508,7 @@ int xhci_run(struct usb_hcd *hcd) u64 temp_64; int ret; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct xhci_interrupter *ir = xhci->interrupter; + struct xhci_interrupter *ir = xhci->interrupters[0]; /* Start the xHCI host controller running only after the USB 2.0 roothub * is setup. */ @@ -572,7 +572,7 @@ void xhci_stop(struct usb_hcd *hcd) { u32 temp; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct xhci_interrupter *ir = xhci->interrupter; + struct xhci_interrupter *ir = xhci->interrupters[0];
mutex_lock(&xhci->mutex);
@@ -668,36 +668,49 @@ EXPORT_SYMBOL_GPL(xhci_shutdown); #ifdef CONFIG_PM static void xhci_save_registers(struct xhci_hcd *xhci) { - struct xhci_interrupter *ir = xhci->interrupter; + struct xhci_interrupter *ir; + unsigned int i;
xhci->s3.command = readl(&xhci->op_regs->command); xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification); xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
- if (!ir) - return; + /* save both primary and all secondary interrupters */ + for (i = 0; i < xhci->max_interrupters; i++) { + ir = xhci->interrupters[i]; + if (!ir) + continue;
- ir->s3_erst_size = readl(&ir->ir_set->erst_size); - ir->s3_erst_base = xhci_read_64(xhci, &ir->ir_set->erst_base); - ir->s3_erst_dequeue = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); - ir->s3_irq_pending = readl(&ir->ir_set->irq_pending); - ir->s3_irq_control = readl(&ir->ir_set->irq_control); + ir->s3_erst_size = readl(&ir->ir_set->erst_size); + ir->s3_erst_base = xhci_read_64(xhci, &ir->ir_set->erst_base); + ir->s3_erst_dequeue = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); + ir->s3_irq_pending = readl(&ir->ir_set->irq_pending); + ir->s3_irq_control = readl(&ir->ir_set->irq_control); + } }
static void xhci_restore_registers(struct xhci_hcd *xhci) { - struct xhci_interrupter *ir = xhci->interrupter; + struct xhci_interrupter *ir; + unsigned int i;
writel(xhci->s3.command, &xhci->op_regs->command); writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification); xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); writel(xhci->s3.config_reg, &xhci->op_regs->config_reg); - writel(ir->s3_erst_size, &ir->ir_set->erst_size); - xhci_write_64(xhci, ir->s3_erst_base, &ir->ir_set->erst_base); - xhci_write_64(xhci, ir->s3_erst_dequeue, &ir->ir_set->erst_dequeue); - writel(ir->s3_irq_pending, &ir->ir_set->irq_pending); - writel(ir->s3_irq_control, &ir->ir_set->irq_control); + + for (i = 0; i < xhci->max_interrupters; i++) { + ir = xhci->interrupters[i]; + if (!ir) + continue; + + writel(ir->s3_erst_size, &ir->ir_set->erst_size); + xhci_write_64(xhci, ir->s3_erst_base, &ir->ir_set->erst_base); + xhci_write_64(xhci, ir->s3_erst_dequeue, &ir->ir_set->erst_dequeue); + writel(ir->s3_irq_pending, &ir->ir_set->irq_pending); + writel(ir->s3_irq_control, &ir->ir_set->irq_control); + } }
static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) @@ -1058,7 +1071,7 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg) xhci_dbg(xhci, "// Disabling event ring interrupts\n"); temp = readl(&xhci->op_regs->status); writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status); - xhci_disable_interrupter(xhci->interrupter); + xhci_disable_interrupter(xhci->interrupters[0]);
xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7e282b4522c0..d706a27ec0a3 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/usb/hcd.h> #include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/usb/xhci-intr.h>
/* Code sharing between pci-quirks and xhci hcd */ #include "xhci-ext-caps.h" @@ -1541,18 +1542,6 @@ static inline const char *xhci_trb_type_string(u8 type) #define AVOID_BEI_INTERVAL_MIN 8 #define AVOID_BEI_INTERVAL_MAX 32
-struct xhci_segment { - union xhci_trb *trbs; - /* private to HCD */ - struct xhci_segment *next; - dma_addr_t dma; - /* Max packet sized bounce buffer for td-fragmant alignment */ - dma_addr_t bounce_dma; - void *bounce_buf; - unsigned int bounce_offs; - unsigned int bounce_len; -}; - enum xhci_cancelled_td_status { TD_DIRTY = 0, TD_HALTED, @@ -1585,16 +1574,6 @@ struct xhci_cd { union xhci_trb *cmd_trb; };
-enum xhci_ring_type { - TYPE_CTRL = 0, - TYPE_ISOC, - TYPE_BULK, - TYPE_INTR, - TYPE_STREAM, - TYPE_COMMAND, - TYPE_EVENT, -}; - static inline const char *xhci_ring_type_string(enum xhci_ring_type type) { switch (type) { @@ -1615,46 +1594,6 @@ static inline const char *xhci_ring_type_string(enum xhci_ring_type type) }
return "UNKNOWN"; -} - -struct xhci_ring { - struct xhci_segment *first_seg; - struct xhci_segment *last_seg; - union xhci_trb *enqueue; - struct xhci_segment *enq_seg; - union xhci_trb *dequeue; - struct xhci_segment *deq_seg; - struct list_head td_list; - /* - * Write the cycle state into the TRB cycle field to give ownership of - * the TRB to the host controller (if we are the producer), or to check - * if we own the TRB (if we are the consumer). See section 4.9.1. - */ - u32 cycle_state; - unsigned int stream_id; - unsigned int num_segs; - unsigned int num_trbs_free; /* used only by xhci DbC */ - unsigned int bounce_buf_len; - enum xhci_ring_type type; - bool last_td_was_short; - struct radix_tree_root *trb_address_map; -}; - -struct xhci_erst_entry { - /* 64-bit event ring segment address */ - __le64 seg_addr; - __le32 seg_size; - /* Set to zero */ - __le32 rsvd; -}; - -struct xhci_erst { - struct xhci_erst_entry *entries; - unsigned int num_entries; - /* xhci->event_ring keeps track of segment dma addresses */ - dma_addr_t erst_dma_addr; - /* Num entries the ERST can contain */ - unsigned int erst_size; };
struct xhci_scratchpad { @@ -1707,18 +1646,6 @@ struct xhci_bus_state { unsigned long resuming_ports; };
-struct xhci_interrupter { - struct xhci_ring *event_ring; - struct xhci_erst erst; - struct xhci_intr_reg __iomem *ir_set; - unsigned int intr_num; - /* For interrupter registers save and restore over suspend/resume */ - u32 s3_irq_pending; - u32 s3_irq_control; - u32 s3_erst_size; - u64 s3_erst_base; - u64 s3_erst_dequeue; -}; /* * It can take up to 20 ms to transition from RExit to U0 on the * Intel Lynx Point LP xHCI host. @@ -1799,7 +1726,7 @@ struct xhci_hcd { struct reset_control *reset; /* data structures */ struct xhci_device_context_array *dcbaa; - struct xhci_interrupter *interrupter; + struct xhci_interrupter **interrupters; struct xhci_ring *cmd_ring; unsigned int cmd_ring_state; #define CMD_RING_STATE_RUNNING (1 << 0) diff --git a/include/linux/usb/xhci-intr.h b/include/linux/usb/xhci-intr.h new file mode 100644 index 000000000000..e0091ee2c73a --- /dev/null +++ b/include/linux/usb/xhci-intr.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_XHCI_INTR_H +#define __LINUX_XHCI_INTR_H + +#include <linux/kernel.h> + +struct xhci_erst_entry { + /* 64-bit event ring segment address */ + __le64 seg_addr; + __le32 seg_size; + /* Set to zero */ + __le32 rsvd; +}; + +enum xhci_ring_type { + TYPE_CTRL = 0, + TYPE_ISOC, + TYPE_BULK, + TYPE_INTR, + TYPE_STREAM, + TYPE_COMMAND, + TYPE_EVENT, +}; + +struct xhci_erst { + struct xhci_erst_entry *entries; + unsigned int num_entries; + /* xhci->event_ring keeps track of segment dma addresses */ + dma_addr_t erst_dma_addr; + /* Num entries the ERST can contain */ + unsigned int erst_size; +}; + +struct xhci_segment { + union xhci_trb *trbs; + /* private to HCD */ + struct xhci_segment *next; + dma_addr_t dma; + /* Max packet sized bounce buffer for td-fragmant alignment */ + dma_addr_t bounce_dma; + void *bounce_buf; + unsigned int bounce_offs; + unsigned int bounce_len; +}; + +struct xhci_ring { + struct xhci_segment *first_seg; + struct xhci_segment *last_seg; + union xhci_trb *enqueue; + struct xhci_segment *enq_seg; + union xhci_trb *dequeue; + struct xhci_segment *deq_seg; + struct list_head td_list; + /* + * Write the cycle state into the TRB cycle field to give ownership of + * the TRB to the host controller (if we are the producer), or to check + * if we own the TRB (if we are the consumer). See section 4.9.1. + */ + u32 cycle_state; + unsigned int stream_id; + unsigned int num_segs; + unsigned int num_trbs_free; + unsigned int num_trbs_free_temp; + unsigned int bounce_buf_len; + enum xhci_ring_type type; + bool last_td_was_short; + struct radix_tree_root *trb_address_map; +}; + +struct xhci_interrupter { + struct xhci_ring *event_ring; + struct xhci_erst erst; + struct xhci_intr_reg __iomem *ir_set; + unsigned int intr_num; + /* For interrupter registers save and restore over suspend/resume */ + u32 s3_irq_pending; + u32 s3_irq_control; + u32 s3_erst_size; + u64 s3_erst_base; + u64 s3_erst_dequeue; +}; + +struct xhci_interrupter * +xhci_create_secondary_interrupter(struct usb_hcd *hcd); +void xhci_remove_secondary_interrupter(struct usb_hcd *hcd, struct xhci_interrupter *ir); +#endif