The L3 bus GPIOs are specified in the board file rather than through the sound card's device platform_data. This allows to ensure the codec driver doesn't get probed with uninitialized platform_data field of its corresponding platform device.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com --- arch/arm/mach-s3c24xx/mach-mini2440.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index a852168..13999c1 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -497,9 +497,28 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = { }, };
+static struct uda134x_platform_data s3c24xx_uda134x = { + .l3 = { + .gpio_clk = S3C2410_GPB(4), + .gpio_data = S3C2410_GPB(3), + .gpio_mode = S3C2410_GPB(2), + .use_gpios = 1, + .data_hold = 1, + .data_setup = 1, + .clock_high = 1, + .mode_hold = 1, + .mode = 1, + .mode_setup = 1, + }, + .model = UDA134X_UDA1341, +}; + static struct platform_device uda1340_codec = { .name = "uda134x-codec", .id = -1, + .dev = { + .platform_data = &s3c24xx_uda134x, + }, };
static struct platform_device *mini2440_devices[] __initdata = {