The patch
ASoC: Intel: Skylake: Add module configuration helpers
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From f7590d4f1565b0d609d25113c37b9bea8a13e9f7 Mon Sep 17 00:00:00 2001
From: Jeeja KP jeeja.kp@intel.com Date: Wed, 7 Oct 2015 11:31:53 +0100 Subject: [PATCH] ASoC: Intel: Skylake: Add module configuration helpers
To configure a module, driver needs to send input and output PCM params for a module in DSP. The FE PCM params come from hw_params ie from user, for a BE they also come from hw_params but from BE-link fixups. So based on PCM params required driver has to find a converter module (src/updown/format) and then do the conversion and calculate PCM params in these pipelines In this patch we add the helper modules which allow driver to do these calculations.
Signed-off-by: Hardik T Shah hardik.t.shah@intel.com Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/intel/skylake/skl-topology.c | 140 +++++++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+)
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index b0ee1fe..56baf9d 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -27,6 +27,10 @@ #include "skl.h" #include "skl-tplg-interface.h"
+#define SKL_CH_FIXUP_MASK (1 << 0) +#define SKL_RATE_FIXUP_MASK (1 << 1) +#define SKL_FMT_FIXUP_MASK (1 << 2) + /* * SKL DSP driver modelling uses only few DAPM widgets so for rest we will * ignore. This helpers checks if the SKL driver handles this widget type @@ -119,6 +123,137 @@ skl_tplg_free_pipe_mem(struct skl *skl, struct skl_module_cfg *mconfig) skl->resource.mem -= mconfig->pipe->memory_pages; }
+ +static void skl_dump_mconfig(struct skl_sst *ctx, + struct skl_module_cfg *mcfg) +{ + dev_dbg(ctx->dev, "Dumping config\n"); + dev_dbg(ctx->dev, "Input Format:\n"); + dev_dbg(ctx->dev, "channels = %d\n", mcfg->in_fmt.channels); + dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->in_fmt.s_freq); + dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->in_fmt.ch_cfg); + dev_dbg(ctx->dev, "valid bit depth = %d\n", + mcfg->in_fmt.valid_bit_depth); + dev_dbg(ctx->dev, "Output Format:\n"); + dev_dbg(ctx->dev, "channels = %d\n", mcfg->out_fmt.channels); + dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->out_fmt.s_freq); + dev_dbg(ctx->dev, "valid bit depth = %d\n", + mcfg->out_fmt.valid_bit_depth); + dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->out_fmt.ch_cfg); +} + +static void skl_tplg_update_params(struct skl_module_fmt *fmt, + struct skl_pipe_params *params, int fixup) +{ + if (fixup & SKL_RATE_FIXUP_MASK) + fmt->s_freq = params->s_freq; + if (fixup & SKL_CH_FIXUP_MASK) + fmt->channels = params->ch; + if (fixup & SKL_FMT_FIXUP_MASK) + fmt->valid_bit_depth = params->s_fmt; +} + +/* + * A pipeline may have modules which impact the pcm parameters, like SRC, + * channel converter, format converter. + * We need to calculate the output params by applying the 'fixup' + * Topology will tell driver which type of fixup is to be applied by + * supplying the fixup mask, so based on that we calculate the output + * + * Now In FE the pcm hw_params is source/target format. Same is applicable + * for BE with its hw_params invoked. + * here based on FE, BE pipeline and direction we calculate the input and + * outfix and then apply that for a module + */ +static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg, + struct skl_pipe_params *params, bool is_fe) +{ + int in_fixup, out_fixup; + struct skl_module_fmt *in_fmt, *out_fmt; + + in_fmt = &m_cfg->in_fmt; + out_fmt = &m_cfg->out_fmt; + + if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (is_fe) { + in_fixup = m_cfg->params_fixup; + out_fixup = (~m_cfg->converter) & + m_cfg->params_fixup; + } else { + out_fixup = m_cfg->params_fixup; + in_fixup = (~m_cfg->converter) & + m_cfg->params_fixup; + } + } else { + if (is_fe) { + out_fixup = m_cfg->params_fixup; + in_fixup = (~m_cfg->converter) & + m_cfg->params_fixup; + } else { + in_fixup = m_cfg->params_fixup; + out_fixup = (~m_cfg->converter) & + m_cfg->params_fixup; + } + } + + skl_tplg_update_params(in_fmt, params, in_fixup); + skl_tplg_update_params(out_fmt, params, out_fixup); +} + +/* + * A module needs input and output buffers, which are dependent upon pcm + * params, so once we have calculate params, we need buffer calculation as + * well. + */ +static void skl_tplg_update_buffer_size(struct skl_sst *ctx, + struct skl_module_cfg *mcfg) +{ + int multiplier = 1; + + if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) + multiplier = 5; + + mcfg->ibs = (mcfg->in_fmt.s_freq / 1000) * + (mcfg->in_fmt.channels) * + (mcfg->in_fmt.bit_depth >> 3) * + multiplier; + + mcfg->obs = (mcfg->out_fmt.s_freq / 1000) * + (mcfg->out_fmt.channels) * + (mcfg->out_fmt.bit_depth >> 3) * + multiplier; +} + +static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w, + struct skl_sst *ctx) +{ + struct skl_module_cfg *m_cfg = w->priv; + struct skl_pipe_params *params = m_cfg->pipe->p_params; + int p_conn_type = m_cfg->pipe->conn_type; + bool is_fe; + + if (!m_cfg->params_fixup) + return; + + dev_dbg(ctx->dev, "Mconfig for widget=%s BEFORE updation\n", + w->name); + + skl_dump_mconfig(ctx, m_cfg); + + if (p_conn_type == SKL_PIPE_CONN_TYPE_FE) + is_fe = true; + else + is_fe = false; + + skl_tplg_update_params_fixup(m_cfg, params, is_fe); + skl_tplg_update_buffer_size(ctx, m_cfg); + + dev_dbg(ctx->dev, "Mconfig for widget=%s AFTER updation\n", + w->name); + + skl_dump_mconfig(ctx, m_cfg); +} + /* * A pipe can have multiple modules, each of them will be a DAPM widget as * well. While managing a pipeline we need to get the list of all the @@ -178,6 +313,11 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) if (!skl_tplg_alloc_pipe_mcps(skl, mconfig)) return -ENOMEM;
+ /* + * apply fix/conversion to module params based on + * FE/BE params + */ + skl_tplg_update_module_params(w, ctx); ret = skl_init_module(ctx, mconfig, NULL); if (ret < 0) return ret;