Set the offset to 0 for TDM mode, as per the current setup. Note we also move the data offset programming to the i2s hw_parameters call as per the suggestion from Jon Hunter.
Signed-off-by: Ben Dooks ben.dooks@codethink.co.uk --- v2: - fix the review comments and move the i2s offset setting v3: - fix data-offset for dsp-a and dsp-b --- sound/soc/tegra/tegra30_i2s.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c index 3839e3d955a8..e99126600fc4 100644 --- a/sound/soc/tegra/tegra30_i2s.c +++ b/sound/soc/tegra/tegra30_i2s.c @@ -66,7 +66,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai); - unsigned int mask = 0, val = 0; + unsigned int mask = 0, val = 0, data_offset = 1; unsigned int ch_mask, ch_val = 0;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) { @@ -100,6 +100,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai, ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_POS_EDGE; val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC; val |= TEGRA30_I2S_CTRL_LRCK_R_LOW; + data_offset = 0; break; case SND_SOC_DAIFMT_I2S: val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_LRCK; @@ -120,6 +121,10 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai, pm_runtime_get_sync(dai->dev); regmap_update_bits(i2s->regmap, TEGRA30_I2S_CTRL, mask, val); regmap_update_bits(i2s->regmap, TEGRA30_I2S_CH_CTRL, ch_mask, ch_val); + val = (data_offset << TEGRA30_I2S_OFFSET_RX_DATA_OFFSET_SHIFT) | + (data_offset << TEGRA30_I2S_OFFSET_TX_DATA_OFFSET_SHIFT); + regmap_write(i2s->regmap, TEGRA30_I2S_OFFSET, val); + pm_runtime_put(dai->dev);
return 0; @@ -203,11 +208,6 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream, }
i2s->soc_data->set_audio_cif(i2s->regmap, reg, &cif_conf); - - val = (1 << TEGRA30_I2S_OFFSET_RX_DATA_OFFSET_SHIFT) | - (1 << TEGRA30_I2S_OFFSET_TX_DATA_OFFSET_SHIFT); - regmap_write(i2s->regmap, TEGRA30_I2S_OFFSET, val); - return 0; }