Well, I used alsa-driver-snapshot.tar.gz now. I see less mixers, as tony said, and now LFE works and is controlled by the "LFE" slider! The bad thing is, now microphone does not work. I have tried with both "Int Mic" and "Ext Mic", the internal microphone does not work.
The file Tony requested, just in case, again: http://files.getdropbox.com/u/553461/codec0new.txt
Thanks for letting me notice I was using the wrong snapshot Takashi!
Emilio
2009/6/22 Takashi Iwai tiwai@suse.de
At Mon, 22 Jun 2009 14:44:09 -0300, Emilio López wrote:
Tony, I don't see less mixer sliders :/
Here is that file's output:
http://files.getdropbox.com/u/553461/codec0.txt
And just in case, a new alsa-info with this new model: http:// files.getdropbox.com/u/553461/alsainfotony.txt
Check always alsa-driver*/alsa-kernel/HEAD file to see whether the changes you want are really included. If not there, try to re-fetch the alsa-driver-snapshot tarball again. There can be some delay on the server until the contents get sync'ed. The recent changes can be tracked from webgit of sound git repository, http://git.kernel.org/?p=linux/kernel/git/tiwai/sound-2.6.git;a=summary The changes specific to HD-audio can be found in topic/hda branch.
Also, use alsa-driver-snapshot.tar.gz, not daily snapshots.
Takashi
Thanks!
Emilio
2009/6/21 Tony Vroon tony@linx.net
On Sun, 2009-06-21 at 20:24 -0300, Emilio López wrote: > Yes, I unmuted and raised up everything. To confirm, if the 6530g model took effect, you will have (significantly) less mixer sliders then usual. Assuming that it did, could you get me /proc/asound/card0/codec#0output
with the 6530g model active please. Based on an earlier report you sent, I think I see the problem.However,
I'd rather be sure. Regards, Tony V.