Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/bt87x.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-)
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index 06dc7d97cc0c..8546711d12f9 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -293,17 +293,23 @@ static void snd_bt87x_pci_error(struct snd_bt87x *chip, unsigned int status) PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY; pci_write_config_word(chip->pci, PCI_STATUS, pci_status); if (pci_status != PCI_STATUS_DETECTED_PARITY) - snd_printk(KERN_ERR "Aieee - PCI error! status %#08x, PCI status %#04x\n", + dev_err(chip->card->dev, + "Aieee - PCI error! status %#08x, PCI status %#04x\n", status & ERROR_INTERRUPTS, pci_status); else { - snd_printk(KERN_ERR "Aieee - PCI parity error detected!\n"); + dev_err(chip->card->dev, + "Aieee - PCI parity error detected!\n"); /* error 'handling' similar to aic7xxx_pci.c: */ chip->pci_parity_errors++; if (chip->pci_parity_errors > 20) { - snd_printk(KERN_ERR "Too many PCI parity errors observed.\n"); - snd_printk(KERN_ERR "Some device on this bus is generating bad parity.\n"); - snd_printk(KERN_ERR "This is an error *observed by*, not *generated by*, this card.\n"); - snd_printk(KERN_ERR "PCI parity error checking has been disabled.\n"); + dev_err(chip->card->dev, + "Too many PCI parity errors observed.\n"); + dev_err(chip->card->dev, + "Some device on this bus is generating bad parity.\n"); + dev_err(chip->card->dev, + "This is an error *observed by*, not *generated by*, this card.\n"); + dev_err(chip->card->dev, + "PCI parity error checking has been disabled.\n"); chip->interrupt_mask &= ~(INT_PPERR | INT_RIPERR); snd_bt87x_writel(chip, REG_INT_MASK, chip->interrupt_mask); } @@ -323,9 +329,11 @@ static irqreturn_t snd_bt87x_interrupt(int irq, void *dev_id)
if (irq_status & ERROR_INTERRUPTS) { if (irq_status & (INT_FBUS | INT_FTRGT)) - snd_printk(KERN_WARNING "FIFO overrun, status %#08x\n", status); + dev_warn(chip->card->dev, + "FIFO overrun, status %#08x\n", status); if (irq_status & INT_OCERR) - snd_printk(KERN_ERR "internal RISC error, status %#08x\n", status); + dev_err(chip->card->dev, + "internal RISC error, status %#08x\n", status); if (irq_status & (INT_PPERR | INT_RIPERR | INT_PABORT)) snd_bt87x_pci_error(chip, irq_status); } @@ -747,7 +755,7 @@ static int snd_bt87x_create(struct snd_card *card, } chip->mmio = pci_ioremap_bar(pci, 0); if (!chip->mmio) { - snd_printk(KERN_ERR "cannot remap io memory\n"); + dev_err(card->dev, "cannot remap io memory\n"); err = -ENOMEM; goto fail; } @@ -762,7 +770,7 @@ static int snd_bt87x_create(struct snd_card *card, err = request_irq(pci->irq, snd_bt87x_interrupt, IRQF_SHARED, KBUILD_MODNAME, chip); if (err < 0) { - snd_printk(KERN_ERR "cannot grab irq %d\n", pci->irq); + dev_err(card->dev, "cannot grab irq %d\n", pci->irq); goto fail; } chip->irq = pci->irq; @@ -850,14 +858,15 @@ static int snd_bt87x_detect_card(struct pci_dev *pci) for (i = 0; i < ARRAY_SIZE(blacklist); ++i) if (blacklist[i].subvendor == pci->subsystem_vendor && blacklist[i].subdevice == pci->subsystem_device) { - snd_printdd(KERN_INFO "card %#04x-%#04x:%#04x has no audio\n", + dev_dbg(&pci->dev, + "card %#04x-%#04x:%#04x has no audio\n", pci->device, pci->subsystem_vendor, pci->subsystem_device); return -EBUSY; }
- snd_printk(KERN_INFO "unknown card %#04x-%#04x:%#04x\n", + dev_info(&pci->dev, "unknown card %#04x-%#04x:%#04x\n", pci->device, pci->subsystem_vendor, pci->subsystem_device); - snd_printk(KERN_DEBUG "please mail id, board name, and, " + dev_info(&pci->dev, "please mail id, board name, and, " "if it works, the correct digital_rate option to " "alsa-devel@alsa-project.org\n"); return SND_BT87X_BOARD_UNKNOWN; @@ -925,7 +934,7 @@ static int snd_bt87x_probe(struct pci_dev *pci, if (err < 0) goto _error; } - snd_printk(KERN_INFO "bt87x%d: Using board %d, %sanalog, %sdigital " + dev_info(card->dev, "bt87x%d: Using board %d, %sanalog, %sdigital " "(rate %d Hz)\n", dev, boardid, chip->board.no_analog ? "no " : "", chip->board.no_digital ? "no " : "", chip->board.dig_rate);