Hi Mark,
On Fri, Jun 02, 2023 at 12:43:51PM +0100, Mark Brown wrote:
On Fri, Jun 02, 2023 at 11:03:18AM +0200, Alvin Šipraga wrote:
From: Alvin Šipraga alsi@bang-olufsen.dk
The new flag specifies that both ends of the dai-link have the same clock consumer/provider role. This should be used to describe hardware where e.g. the CPU and codec both receive their bit- and frame-clocks from an external source.
Why would we have a property for this and not just describe whatever the actual clocking arrangement is?
Sure - let me just elaborate on my thinking and maybe you can help me with a better approach:
The clocking arrangement is encoded in the dai_fmt field of snd_soc_dai_link, but this is a single value that describes the format on both ends. The current behaviour of ASoC is to flip the clock roles encoded in dai_fmt when applying it to the CPU side of the link.
Looking from a DT perspective, if I do not specify e.g. bitclock-master on either side of the link, then the dai_fmt will describe the codec as a bitclock consumer and (after flipping) the CPU as a provider. That's the default implication of the DT bindings and I can't break compatibility there.
The other issue is that for the simple-card the DAI format is only parsed in one place and applied to the whole link. Are you proposing that it be modified to explicitly try and parse both ends in order to determine if both sides want to be clock consumers? In that case I'd have to also introduce bitclock-consumer and frameclock-consumer properties to mirror the existing bitclock-master and frameclock-master properties, as an explicit absence of the *-master property on both sides would have to default to the original ASoC behaviour described above.
Or did you have something else in mind?
Thanks for your review.
Kind regards, Alvin