Can you combine this patch with "ASoC: nau8825: disable crosstalk by default"? This should be a part of that patch.
On Thu, Nov 30, 2017 at 10:13 AM, John Hsu KCHSU0@nuvoton.com wrote:
Although the crosstalk is disabled, it is better to set clear_irq properly when the impedance measurement interrupt happens. It can avoid that the driver clears other IRQs by accident if the active_irq has another IRQ events.
Signed-off-by: John Hsu KCHSU0@nuvoton.com
sound/soc/codecs/nau8825.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index d3c1a02..603cd72 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1733,10 +1733,9 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) nau8825->xtalk_event_mask = event_mask; } } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) {
if (nau8825->xtalk_enable) {
if (nau8825->xtalk_enable) schedule_work(&nau8825->xtalk_work);
clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;}
clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) == NAU8825_JACK_INSERTION_DETECTED) { /* One more step to check GPIO status directly. Thus, the-- 2.6.4