On Sat, 26 Aug 2017 16:56:02 +0200, Jens Verwiebe wrote:
Hi folks
As an owner of an Focusrite Scarlett 6i6 (gen 1)i was bothered that i could not
switch rear inputs 3/4 gain. After investigating the code i found the specs of
that interface not used right. I wrote a patch and tested this well so far.
Afaik the same could be used also for the 18i18 and 18i20, but i left those untouched
for i could not test myself. Pls review and take over in case its accepted.
FYI, we can't take over / accept patches unless they are properly submitted with sign-off, simply because of legal reasons. Please refer to Documentation/SubmittingPatches.
thanks,
Takashi
Cheers ... Jens
The patch:
--- /sound/usb/mixer_scarlett_nv.c 2017-04-08 09:53:53.000000000 +0200 +++ /sound/usb/mixer_scarlett.c 2017-08-26 03:15:15.734930629 +0200 @@ -152,6 +152,7 @@ SCARLETT_OUTPUTS, SCARLETT_SWITCH_IMPEDANCE, SCARLETT_SWITCH_PAD,
- SCARLETT_SWITCH_GAIN,
};
enum { @@ -202,6 +203,15 @@ } };
+static const struct scarlett_mixer_elem_enum_info opt_gain = {
- .start = 0,
- .len = 2,
- .offsets = {},
- .names = (char const * const []){
"Lo", "Hi"
- }
+};
static const struct scarlett_mixer_elem_enum_info opt_impedance = { .start = 0, .len = 2, @@ -664,8 +674,8 @@ { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL},
{ .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL},
{ .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},
{ .num = 3, .type = SCARLETT_SWITCH_GAIN, .name = NULL},
{ .num = 4, .type = SCARLETT_SWITCH_GAIN, .name = NULL},
},
.matrix_mux_init = {
@@ -895,6 +905,15 @@ if (err < 0) return err; break;
case SCARLETT_SWITCH_GAIN:
sprintf(mx, "Input %d Gain Switch", ctl->num);
err = add_new_ctl(mixer, &usb_scarlett_ctl_enum,
scarlett_ctl_enum_resume, 0x01,
0x08, ctl->num, USB_MIXER_S16, 1, mx,
&opt_gain, &elem);
if (err < 0)
return err;
}break; }
--
Jens Verwiebe Allerskehre 44 - 22309 Hamburg
Tel.: +49 40 68 78 50 mobile: +49 172 400 49 07 mailto: info@jensverwiebe.de web: http://www.jensverwiebe.de
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel