At Sat, 9 Feb 2013 00:44:39 +0200, Anssi Hannula wrote:
Commit dcda5806165c155d90b9aa466a1602cf4726012b ("ALSA: hda - Add workaround for conflicting IEC958 controls") added a workaround for cards that have both an S/PDIF and an HDMI device, so that S/PDIF IEC958 controls will be moved to device=1 on such cards.
However, the workaround did not take it into account that the S/PDIF and HDMI devices may be on different codecs of the same card. Currently this is always the case, and the workaround therefore fails to work.
Fix the workaround to handle card-wide IEC958 conflicts.
Reported-by: Stephan Raue stephan@openelec.tv Signed-off-by: Anssi Hannula anssi.hannula@iki.fi
Unfortunately this seems to cause a nasty issue with alsa-lib 1.0.26: $ amixer scontrols -c 0 ALSA lib simple_none.c:1551:(simple_add1) helem (MIXER,'IEC958 Playback Switch',0,1,0) appears twice or more amixer: Mixer hw:0 load error: Invalid argument
The non-simple-mode "amixer controls -c 0" works fine, though.
Not really sure what to do now then, do we revert the workaround completely and devise a different workaround/fix for this, or do you have some other good ideas?
If the element isn't really dup'ed, it must be a bug in alsa-lib mixer abstraction, so it should be fixed there.
Could you add alsa-info.sh output of this board (at best before and after your patch)?
thanks,
Takashi
sound/pci/hda/hda_codec.c | 27 +++++++++++++++------------ sound/pci/hda/hda_codec.h | 4 +++- 2 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 822df97..fe5d6fc 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3135,25 +3135,28 @@ int snd_hda_create_dig_out_ctls(struct hda_codec *codec, int idx, dev = 0; const int spdif_pcm_dev = 1; struct hda_spdif_out *spdif;
- struct hda_codec *c;
- if (codec->primary_dig_out_type == HDA_PCM_TYPE_HDMI &&
- if (codec->bus->primary_dig_out_type == HDA_PCM_TYPE_HDMI && type == HDA_PCM_TYPE_SPDIF) { dev = spdif_pcm_dev;
- } else if (codec->primary_dig_out_type == HDA_PCM_TYPE_SPDIF &&
- } else if (codec->bus->primary_dig_out_type == HDA_PCM_TYPE_SPDIF && type == HDA_PCM_TYPE_HDMI) {
for (idx = 0; idx < codec->spdif_out.used; idx++) {spdif = snd_array_elem(&codec->spdif_out, idx);for (dig_mix = dig_mixes; dig_mix->name; dig_mix++) {kctl = find_mixer_ctl(codec, dig_mix->name, 0, idx);if (!kctl)break;kctl->id.device = spdif_pcm_dev;
list_for_each_entry(c, &codec->bus->codec_list, list) {for (idx = 0; idx < c->spdif_out.used; idx++) {spdif = snd_array_elem(&c->spdif_out, idx);for (dig_mix = dig_mixes; dig_mix->name; dig_mix++) {kctl = find_mixer_ctl(c, dig_mix->name, 0, idx);if (!kctl)break;kctl->id.device = spdif_pcm_dev;} }
codec->primary_dig_out_type = HDA_PCM_TYPE_HDMI;
codec->bus->primary_dig_out_type = HDA_PCM_TYPE_HDMI;
- if (!codec->primary_dig_out_type)
codec->primary_dig_out_type = type;
if (!codec->bus->primary_dig_out_type)
codec->bus->primary_dig_out_type = type;idx = find_empty_mixer_ctl_idx(codec, "IEC958 Playback Switch", dev); if (idx < 0) {
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 8665540..ab807f7 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -671,6 +671,9 @@ struct hda_bus { unsigned int response_reset:1; /* controller was reset */ unsigned int in_reset:1; /* during reset operation */ unsigned int power_keep_link_on:1; /* don't power off HDA link */
- /* primary digital out PCM type */
- int primary_dig_out_type;
};
/* @@ -837,7 +840,6 @@ struct hda_codec { struct mutex hash_mutex; struct snd_array spdif_out; unsigned int spdif_in_enable; /* SPDIF input enable? */
- int primary_dig_out_type; /* primary digital out PCM type */ const hda_nid_t *slave_dig_outs; /* optional digital out slave widgets */ struct snd_array init_pins; /* initial (BIOS) pin configurations */ struct snd_array driver_pins; /* pin configs set by codec parser */
-- 1.7.10