Hi,
-----Original Message----- From: Alsa-devel alsa-devel-bounces@alsa-project.org On Behalf Of Pierre-Louis Bossart Sent: 27 July 2022 17:37 To: Stefan Binding sbinding@opensource.cirrus.com; Mark Brown broonie@kernel.org; Liam Girdwood lgirdwood@gmail.com; Brent Lu brent.lu@intel.com; xliu xiang.liu@cirrus.com Cc: Vitaly Rodionov vitalyr@opensource.cirrus.com; patches@opensource.cirrus.com; alsa-devel@alsa-project.org; linux- kernel@vger.kernel.org Subject: Re: [PATCH v2] ASoC: Intel: cirrus-common: Use UID to map correct amp to prefix
+/*
- Expected UIDs are integers (stored as strings).
- UID Mapping is fixed:
- UID 0x0 -> WL
- UID 0x1 -> WR
- UID 0x2 -> TL
- UID 0x3 -> TR
- Note: If there are less than 4 Amps, UIDs still map to
WL/WR/TL/TR. Dynamic code will only create
- dai links for UIDs which exist, and ignore non-existant ones.
is this intentional to support all variations of 1,2,3 and 4 amplifiers being present?
Or is the intent to really support 2 or 4?
The intent was to support 2 or 4, rather than any number of amps, in case something was released with 2 amps.
- Return number of codecs found.
- */
+static int cs35l41_compute_codec_conf(void) +{
- const char * const uid_strings[] = { "0", "1", "2", "3" };
- unsigned int uid, sz = 0;
- struct acpi_device *adev;
- struct device *physdev;
- for (uid = 0; uid < CS35L41_MAX_AMPS; uid++) {
adev = acpi_dev_get_first_match_dev(CS35L41_HID,
uid_strings[uid], -1);
if (!adev) {
pr_warn("Cannot find match for HID %s UID
%u (%s)\n", CS35L41_HID, uid,
cs35l41_name_prefixes[uid]);
A warning is a bit strong if some valid configurations don't expose all 4 codecs.
I'll change this to a debug message, but also add an error if there is not 2 or 4 amps found.
continue;
}
physdev =
get_device(acpi_get_first_physical_node(adev));
cs35l41_components[sz].name = dev_name(physdev);
cs35l41_components[sz].dai_name =
CS35L41_CODEC_DAI;
cs35l41_codec_conf[sz].dlc.name =
dev_name(physdev);
cs35l41_codec_conf[sz].name_prefix =
cs35l41_name_prefixes[uid];
acpi_dev_put(adev);
sz++;
- }
- return sz;
Thanks, Stefan