Do not enable the amplifier right after the power has been restored to the amplifier. The DAPM_SUPPLY widget turns on the amp early in the DAPM power walk, and the unmuting of channel happens quite late. Keeping the amp in SW reset state ensures better muting. In this way the pop noise coming from other components (codec) can be filtered out.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com --- sound/soc/codecs/tpa6130a2.c | 6 +----- 1 files changed, 1 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c index 199edf0..42887ae 100644 --- a/sound/soc/codecs/tpa6130a2.c +++ b/sound/soc/codecs/tpa6130a2.c @@ -151,11 +151,6 @@ static int tpa6130a2_power(u8 power) data->power_state = 0; goto exit; } - - /* Clear SWS */ - val = tpa6130a2_read(TPA6130A2_REG_CONTROL); - val &= ~TPA6130A2_SWS; - tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val); } else { /* set SWS */ val = tpa6130a2_read(TPA6130A2_REG_CONTROL); @@ -301,6 +296,7 @@ static void tpa6130a2_channel_enable(u8 channel, int enable) /* Enable amplifier */ val = tpa6130a2_read(TPA6130A2_REG_CONTROL); val |= channel; + val &= ~TPA6130A2_SWS; tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
/* Unmute channel */