The tas2781-i2c driver gets an IRQ from either ACPI or device tree, then proceeds to check if the IRQ has a corresponding GPIO and in case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and the IRQs are the same, i.e that an IRQ number corresponds to a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal APIs, the irqchip needs to ascertain that the backing GPIO line is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help to fix the issues.
It *should* not create any problems, because the irq isn't used anywhere in the driver, it's just obtained and then left unused.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Linus Walleij linus.walleij@linaro.org --- include/sound/tas2781.h | 7 +------ sound/pci/hda/tas2781_hda_i2c.c | 2 +- sound/soc/codecs/tas2781-comlib.c | 3 --- sound/soc/codecs/tas2781-fmwlib.c | 1 - sound/soc/codecs/tas2781-i2c.c | 24 +++--------------------- 5 files changed, 5 insertions(+), 32 deletions(-)
diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 99ca3e401fd1..6f6e3e2f652c 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -80,11 +80,6 @@ struct tasdevice { bool is_loaderr; };
-struct tasdevice_irqinfo { - int irq_gpio; - int irq; -}; - struct calidata { unsigned char *data; unsigned long total_sz; @@ -92,7 +87,6 @@ struct calidata {
struct tasdevice_priv { struct tasdevice tasdevice[TASDEVICE_MAX_CHANNELS]; - struct tasdevice_irqinfo irq_info; struct tasdevice_rca rcabin; struct calidata cali_data; struct tasdevice_fw *fmw; @@ -113,6 +107,7 @@ struct tasdevice_priv { unsigned int chip_id; unsigned int sysclk;
+ int irq; int cur_prog; int cur_conf; int fw_state; diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 75f7674c66ee..c5ace7216ecb 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -818,7 +818,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt) } else return -ENODEV;
- tas_hda->priv->irq_info.irq = clt->irq; + tas_hda->priv->irq = clt->irq; ret = tas2781_read_acpi(tas_hda->priv, device_name); if (ret) return dev_err_probe(tas_hda->dev, ret, diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 3aa81514dad7..0444cf90c511 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -14,7 +14,6 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -406,8 +405,6 @@ EXPORT_SYMBOL_GPL(tasdevice_dsp_remove);
void tasdevice_remove(struct tasdevice_priv *tas_priv) { - if (gpio_is_valid(tas_priv->irq_info.irq_gpio)) - gpio_free(tas_priv->irq_info.irq_gpio); mutex_destroy(&tas_priv->codec_lock); } EXPORT_SYMBOL_GPL(tasdevice_remove); diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 265a8ca25cbb..d6afab542da7 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -13,7 +13,6 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/slab.h> diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9350972dfefe..1542915b83a2 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -21,7 +21,6 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -605,7 +604,7 @@ static void tasdevice_parse_dt(struct tasdevice_priv *tas_priv) { struct i2c_client *client = (struct i2c_client *)tas_priv->client; unsigned int dev_addrs[TASDEVICE_MAX_CHANNELS]; - int rc, i, ndev = 0; + int i, ndev = 0;
if (tas_priv->isacpi) { ndev = device_property_read_u32_array(&client->dev, @@ -620,7 +619,7 @@ static void tasdevice_parse_dt(struct tasdevice_priv *tas_priv) "ti,audio-slots", dev_addrs, ndev); }
- tas_priv->irq_info.irq_gpio = + tas_priv->irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(&client->dev), 0); } else { struct device_node *np = tas_priv->dev->of_node; @@ -648,7 +647,7 @@ static void tasdevice_parse_dt(struct tasdevice_priv *tas_priv) ndev = 1; dev_addrs[0] = client->addr; #endif - tas_priv->irq_info.irq_gpio = of_irq_get(np, 0); + tas_priv->irq = of_irq_get(np, 0); } tas_priv->ndev = ndev; for (i = 0; i < ndev; i++) @@ -661,23 +660,6 @@ static void tasdevice_parse_dt(struct tasdevice_priv *tas_priv) __func__);
strcpy(tas_priv->dev_name, tasdevice_id[tas_priv->chip_id].name); - - if (gpio_is_valid(tas_priv->irq_info.irq_gpio)) { - rc = gpio_request(tas_priv->irq_info.irq_gpio, - "AUDEV-IRQ"); - if (!rc) { - gpio_direction_input( - tas_priv->irq_info.irq_gpio); - - tas_priv->irq_info.irq = - gpio_to_irq(tas_priv->irq_info.irq_gpio); - } else - dev_err(tas_priv->dev, "%s: GPIO %d request error\n", - __func__, tas_priv->irq_info.irq_gpio); - } else - dev_err(tas_priv->dev, - "Looking up irq-gpio property failed %d\n", - tas_priv->irq_info.irq_gpio); }
static int tasdevice_i2c_probe(struct i2c_client *i2c)