Added sram bank variable to audio_substream_data structure.
Signed-off-by: Vijendar Mukunda Vijendar.Mukunda@amd.com --- sound/soc/amd/acp-pcm-dma.c | 20 +++++--------------- sound/soc/amd/acp.h | 20 ++++++++++++++------ 2 files changed, 19 insertions(+), 21 deletions(-)
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 39597fb..8236116 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -320,29 +320,16 @@ static void config_acp_dma(void __iomem *acp_mmio, struct audio_substream_data *rtd, u32 asic_type) { - u32 sram_bank; - - if (rtd->direction == SNDRV_PCM_STREAM_PLAYBACK) - sram_bank = ACP_SHARED_RAM_BANK_1_ADDRESS; - else { - switch (asic_type) { - case CHIP_STONEY: - sram_bank = ACP_SHARED_RAM_BANK_3_ADDRESS; - break; - default: - sram_bank = ACP_SHARED_RAM_BANK_5_ADDRESS; - } - } acp_pte_config(acp_mmio, rtd->pg, rtd->num_of_pages, rtd->pte_offset); /* Configure System memory <-> ACP SRAM DMA descriptors */ set_acp_sysmem_dma_descriptors(acp_mmio, rtd->size, rtd->direction, rtd->pte_offset, - rtd->ch1, sram_bank, + rtd->ch1, rtd->sram_bank, rtd->dma_dscr_idx_1, asic_type); /* Configure ACP SRAM <-> I2S DMA descriptors */ set_acp_to_i2s_dma_descriptors(acp_mmio, rtd->size, - rtd->direction, sram_bank, + rtd->direction, rtd->sram_bank, rtd->destination, rtd->ch2, rtd->dma_dscr_idx_2, asic_type); } @@ -795,6 +782,7 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, } rtd->ch1 = SYSRAM_TO_ACP_CH_NUM; rtd->ch2 = ACP_TO_I2S_DMA_CH_NUM; + rtd->sram_bank = ACP_SRAM_BANK_1_ADDRESS; rtd->destination = TO_ACP_I2S_1; rtd->dma_dscr_idx_1 = PLAYBACK_START_DMA_DESCR_CH12; rtd->dma_dscr_idx_2 = PLAYBACK_START_DMA_DESCR_CH13; @@ -805,9 +793,11 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, switch (adata->asic_type) { case CHIP_STONEY: rtd->pte_offset = ACP_ST_CAPTURE_PTE_OFFSET; + rtd->sram_bank = ACP_SRAM_BANK_2_ADDRESS; break; default: rtd->pte_offset = ACP_CAPTURE_PTE_OFFSET; + rtd->sram_bank = ACP_SRAM_BANK_5_ADDRESS; } rtd->ch1 = ACP_TO_SYSRAM_CH_NUM; rtd->ch2 = I2S_TO_ACP_DMA_CH_NUM; diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h index 2f48d1d..62695ed 100644 --- a/sound/soc/amd/acp.h +++ b/sound/soc/amd/acp.h @@ -19,12 +19,19 @@
#define ACP_PHYSICAL_BASE 0x14000
-/* Playback SRAM address (as a destination in dma descriptor) */ -#define ACP_SHARED_RAM_BANK_1_ADDRESS 0x4002000 - -/* Capture SRAM address (as a source in dma descriptor) */ -#define ACP_SHARED_RAM_BANK_5_ADDRESS 0x400A000 -#define ACP_SHARED_RAM_BANK_3_ADDRESS 0x4006000 +/* + * In case of I2S SP controller instance, Stoney uses SRAM bank 1 for + * playback and SRAM Bank 2 for capture where as in case of BT I2S + * Instance, Stoney uses SRAM Bank 3 for playback & SRAM Bank 4 will + * be used for capture. Carrizo uses I2S SP controller instance. SRAM Banks + * 1, 2, 3, 4 will be used for playback & SRAM Banks 5, 6, 7, 8 will be used + * for capture scenario. + */ +#define ACP_SRAM_BANK_1_ADDRESS 0x4002000 +#define ACP_SRAM_BANK_2_ADDRESS 0x4004000 +#define ACP_SRAM_BANK_3_ADDRESS 0x4006000 +#define ACP_SRAM_BANK_4_ADDRESS 0x4008000 +#define ACP_SRAM_BANK_5_ADDRESS 0x400A000
#define ACP_DMA_RESET_TIME 10000 #define ACP_CLOCK_EN_TIME_OUT_VALUE 0x000000FF @@ -95,6 +102,7 @@ struct audio_substream_data { u16 dma_dscr_idx_1; u16 dma_dscr_idx_2; u32 pte_offset; + u32 sram_bank; u32 byte_cnt_high_reg_offset; u32 byte_cnt_low_reg_offset; uint64_t size;