From: Sanyog Kale sanyog.r.kale@intel.com
SoundWire supports two registers banks. So, program the alternate bank with new configuration and then performs bank switch.
Signed-off-by: Sanyog Kale sanyog.r.kale@intel.com Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- drivers/soundwire/bus.c | 7 ++ drivers/soundwire/bus.h | 5 ++ drivers/soundwire/stream.c | 202 ++++++++++++++++++++++++++++++++++++++++++ include/linux/soundwire/sdw.h | 48 ++++++++++ 4 files changed, 262 insertions(+)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index b8c93f0ac0a0..084bf71b2b87 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -78,6 +78,13 @@ int sdw_add_bus_master(struct sdw_bus *bus) return ret; }
+ /* + * Default active bank will be 0 as out of reset the Slaves have + * to start with bank 0 (Table 40 of Spec) + */ + bus->params.curr_bank = SDW_BANK0; + bus->params.next_bank = SDW_BANK1; + return 0; } EXPORT_SYMBOL(sdw_add_bus_master); diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 07da6c4b10c4..3b15c4e25a3a 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -45,6 +45,11 @@ struct sdw_msg { bool page; };
+#define SDW_DOUBLE_RATE_FACTOR 2 + +extern int rows[SDW_FRAME_ROWS]; +extern int cols[SDW_FRAME_COLS]; + /** * sdw_port_runtime: Runtime port parameters for Master or Slave * diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 435d23cfea44..17890ac7973b 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -15,6 +15,43 @@ #include <linux/soundwire/sdw.h> #include "bus.h"
+/* + * Array of supported rows and columns as per MIPI SoundWire Specification 1.1 + * + * The rows are arranged as per the array index value programmed + * in register. The index 15 has dummy value 0 in order to fill hole. + */ +int rows[SDW_FRAME_ROWS] = {48, 50, 60, 64, 75, 80, 125, 147, + 96, 100, 120, 128, 150, 160, 250, 0, + 192, 200, 240, 256, 72, 144, 90, 180}; + +int cols[SDW_FRAME_COLS] = {2, 4, 6, 8, 10, 12, 14, 16}; + +static int sdw_find_col_index(int col) +{ + int i; + + for (i = 0; i < SDW_FRAME_COLS; i++) { + if (cols[i] == col) + return i; + } + + pr_warn("Requested column not found, selecting lowest column no: 2\n"); + return 0; +} + +static int sdw_find_row_index(int row) +{ + int i; + + for (i = 0; i < SDW_FRAME_ROWS; i++) { + if (rows[i] == row) + return i; + } + + pr_warn("Requested row not found, selecting lowest row no: 48\n"); + return 0; +} static int _sdw_program_slave_port_params(struct sdw_bus *bus, struct sdw_slave *slave, struct sdw_transport_params *t_params, @@ -506,6 +543,171 @@ static int sdw_prep_deprep_ports(struct sdw_master_runtime *m_rt, bool prep) }
/** + * sdw_notify_config: Notify bus configuration + * + * @m_rt: Master runtime handle + * + * This function notifies the Master(s) and Slave(s) of the + * new bus configuration. + */ +static int sdw_notify_config(struct sdw_master_runtime *m_rt) +{ + struct sdw_slave_runtime *s_rt; + struct sdw_bus *bus = m_rt->bus; + struct sdw_slave *slave; + int ret = 0; + + if (bus->ops->set_bus_conf) { + ret = bus->ops->set_bus_conf(bus, &bus->params); + if (ret < 0) + return ret; + } + + list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { + slave = s_rt->slave; + + if (slave->ops->bus_config) { + ret = slave->ops->bus_config(slave, &bus->params); + if (ret < 0) + dev_err(bus->dev, "Notify Slave: %d failed", + slave->dev_num); + return ret; + } + } + + return ret; +} + +/** + * sdw_program_params: Program transport and port parameters for Master(s) + * and Slave(s) + * + * @bus: SDW bus instance + */ +static int sdw_program_params(struct sdw_bus *bus) +{ + struct sdw_master_runtime *m_rt = NULL; + int ret = 0; + + list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { + ret = sdw_program_port_params(m_rt); + if (ret < 0) { + dev_err(bus->dev, + "Program transport params failed: %d", ret); + return ret; + } + + ret = sdw_notify_config(m_rt); + if (ret < 0) { + dev_err(bus->dev, "Notify bus config failed: %d", ret); + return ret; + } + + /* Enable port(s) on alternate bank for all active streams */ + if (m_rt->stream->state != SDW_STREAM_ENABLED) + continue; + + ret = sdw_enable_disable_ports(m_rt, true); + if (ret < 0) { + dev_err(bus->dev, "Enable channel failed: %d", ret); + return ret; + } + } + + return ret; +} + +static int sdw_bank_switch(struct sdw_bus *bus) +{ + int col_index, row_index; + struct sdw_msg *wr_msg; + u8 *wbuf = NULL; + int ret = 0; + u16 addr; + + wr_msg = kzalloc(sizeof(*wr_msg), GFP_KERNEL); + if (!wr_msg) + return -ENOMEM; + + wbuf = kzalloc(sizeof(*wbuf), GFP_KERNEL); + if (!wbuf) { + ret = -ENOMEM; + goto error_1; + } + + /* Get row and column index to program register */ + col_index = sdw_find_col_index(bus->params.col); + row_index = sdw_find_row_index(bus->params.row); + wbuf[0] = col_index | (row_index << 3); + + if (bus->params.next_bank) + addr = SDW_SCP_FRAMECTRL_B1; + else + addr = SDW_SCP_FRAMECTRL_B0; + + sdw_fill_msg(wr_msg, NULL, addr, 1, SDW_BROADCAST_DEV_NUM, + SDW_MSG_FLAG_WRITE, wbuf); + wr_msg->ssp_sync = true; + + ret = sdw_transfer(bus, wr_msg); + if (ret < 0) { + dev_err(bus->dev, "Slave frame_ctrl reg write failed"); + goto error; + } + + kfree(wr_msg); + kfree(wbuf); + bus->defer_msg.msg = NULL; + bus->params.curr_bank = !bus->params.curr_bank; + bus->params.next_bank = !bus->params.next_bank; + + return 0; + +error: + kfree(wbuf); +error_1: + kfree(wr_msg); + return ret; +} + +static int do_bank_switch(struct sdw_stream_runtime *stream) +{ + struct sdw_master_runtime *m_rt = stream->m_rt; + const struct sdw_master_ops *ops; + struct sdw_bus *bus = m_rt->bus; + int ret = 0; + + ops = bus->ops; + + /* Pre-bank switch */ + if (ops->pre_bank_switch) { + ret = ops->pre_bank_switch(bus); + if (ret < 0) { + dev_err(bus->dev, "Pre bank switch op failed: %d", ret); + return ret; + } + } + + /* Bank switch */ + ret = sdw_bank_switch(bus); + if (ret < 0) { + dev_err(bus->dev, "Bank switch failed: %d", ret); + return ret; + } + + /* Post-bank switch */ + if (ops->post_bank_switch) { + ret = ops->post_bank_switch(bus); + if (ret < 0) { + dev_err(bus->dev, + "Post bank switch op failed: %d", ret); + } + } + + return ret; +} + +/** * sdw_release_stream: Free the assigned stream runtime * * @stream: SoundWire stream runtime diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index 6b52e6c53c22..ff4b0134897e 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -23,7 +23,17 @@ struct sdw_slave; #define SDW_MASTER_DEV_NUM 14
#define SDW_NUM_DEV_ID_REGISTERS 6 +/* frame shape defines */
+/* + * Note: The maximum row define in SoundWire spec 1.1 is 23. In order to + * fill hole with 0, one more dummy entry is added + */ +#define SDW_FRAME_ROWS 24 +#define SDW_FRAME_COLS 8 +#define SDW_FRAME_ROW_COLS (SDW_FRAME_ROWS * SDW_FRAME_COLS) + +#define SDW_FRAME_CTRL_BITS 48 #define SDW_MAX_DEVICES 11
#define SDW_VALID_PORT_RANGE(n) (n <= 14 && n >= 1) @@ -377,6 +387,21 @@ enum sdw_reg_bank { };
/** + * struct sdw_bus_conf: Bus configuration + * + * @clk_freq: Clock frequency, in Hz + * @num_rows: Number of rows in frame + * @num_cols: Number of columns in frame + * @bank: Next register bank + */ +struct sdw_bus_conf { + unsigned int clk_freq; + unsigned int num_rows; + unsigned int num_cols; + unsigned int bank; +}; + +/** * struct sdw_prepare_ch: Prepare/De-prepare Data Port channel * * @num: Port number @@ -413,10 +438,20 @@ enum sdw_port_prep_ops { * @curr_bank: Current bank in use (BANK0/BANK1) * @next_bank: Next bank to use (BANK0/BANK1). next_bank will always be * set to !curr_bank + * @max_dr_freq: Maximum double rate clock frequency supported, in Hz + * @curr_dr_freq: Current double rate clock frequency, in Hz + * @bandwidth: Current bandwidth + * @col: Active columns + * @row: Active rows */ struct sdw_bus_params { enum sdw_reg_bank curr_bank; enum sdw_reg_bank next_bank; + unsigned int max_dr_freq; + unsigned int curr_dr_freq; + unsigned int bandwidth; + unsigned int col; + unsigned int row; };
/** @@ -426,6 +461,7 @@ struct sdw_bus_params { * @interrupt_callback: Device interrupt notification (invoked in thread * context) * @update_status: Update Slave status + * @bus_config: Update the bus config for Slave * @port_prep: Prepare the port with parameters */ struct sdw_slave_ops { @@ -434,6 +470,8 @@ struct sdw_slave_ops { struct sdw_slave_intr_status *status); int (*update_status)(struct sdw_slave *slave, enum sdw_slave_status status); + int (*bus_config)(struct sdw_slave *slave, + struct sdw_bus_params *params); int (*port_prep)(struct sdw_slave *slave, struct sdw_prepare_ch *prepare_ch, enum sdw_port_prep_ops pre_ops); @@ -597,6 +635,9 @@ struct sdw_defer { * @xfer_msg: Transfer message callback * @xfer_msg_defer: Defer version of transfer message callback * @reset_page_addr: Reset the SCP page address registers + * @set_bus_conf: Set the bus configuration + * @pre_bank_switch: Callback for pre bank switch + * @post_bank_switch: Callback for post bank switch */ struct sdw_master_ops { int (*read_prop)(struct sdw_bus *bus); @@ -608,6 +649,11 @@ struct sdw_master_ops { struct sdw_defer *defer); enum sdw_command_response (*reset_page_addr) (struct sdw_bus *bus, unsigned int dev_num); + int (*set_bus_conf)(struct sdw_bus *bus, + struct sdw_bus_params *params); + int (*pre_bank_switch)(struct sdw_bus *bus); + int (*post_bank_switch)(struct sdw_bus *bus); + };
/** @@ -628,6 +674,7 @@ struct sdw_master_ops { * transport and port parameters * @defer_msg: Defer message * @clk_stop_timeout: Clock stop timeout computed + * @bank_switch_timeout: Bank switch timeout computed */ struct sdw_bus { struct device *dev; @@ -643,6 +690,7 @@ struct sdw_bus { struct list_head m_rt_list; struct sdw_defer defer_msg; unsigned int clk_stop_timeout; + u32 bank_switch_timeout; };
int sdw_add_bus_master(struct sdw_bus *bus);