The patch
dt-bindings: sound: Add TLV320ADCx140 dt bindings
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 4ee67cbd97668ab1b17d86d85348302c0b7490cd Mon Sep 17 00:00:00 2001
From: Dan Murphy dmurphy@ti.com Date: Thu, 20 Feb 2020 15:07:58 -0600 Subject: [PATCH] dt-bindings: sound: Add TLV320ADCx140 dt bindings
Add dt bindings for the TLV320ADCx140 Burr-Brown ADC. The initial support is for the following:
TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140 TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140 TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140
Signed-off-by: Dan Murphy dmurphy@ti.com Link: https://lore.kernel.org/r/20200220210759.31466-2-dmurphy@ti.com Signed-off-by: Mark Brown broonie@kernel.org --- .../bindings/sound/tlv320adcx140.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml new file mode 100644 index 000000000000..1433ff62b14f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter + +maintainers: + - Dan Murphy dmurphy@ti.com + +description: | + The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital + PDM microphones recording), high-performance audio, analog-to-digital + converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140 + family supports line and microphone Inputs, and offers a programmable + microphone bias or supply voltage generation. + + Specifications can be found at: + http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf + +properties: + compatible: + oneOf: + - const: ti,tlv320adc3140 + - const: ti,tlv320adc5140 + - const: ti,tlv320adc6140 + + reg: + maxItems: 1 + description: | + I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpios: + description: | + GPIO used for hardware reset. + + areg-supply: + description: | + Regulator with AVDD at 3.3V. If not defined then the internal regulator + is enabled. + + ti,mic-bias-source: + description: | + Indicates the source for MIC Bias. + 0 - Mic bias is set to VREF + 1 - Mic bias is set to VREF × 1.096 + 6 - Mic bias is set to AVDD + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 6] + + ti,vref-source: + description: | + Indicates the source for MIC Bias. + 0 - Set VREF to 2.75V + 1 - Set VREF to 2.5V + 2 - Set VREF to 1.375V + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tlv320adc5140"; + reg = <0x4c>; + ti,use-internal-areg; + ti,mic-bias-source = <6>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + };