On Thu, 2023-06-08 at 10:47 +0200, AngeloGioacchino Del Regno wrote:
Replace open coded instances of FIELD_GET() with it, move register definitions at the top of the file and also replace magic numbers with register definitions.
While at it, also change a regmap_update_bits() call to regmap_write() because the top 29 bits of AUD_TOP_CFG (31:3) are reserved (unused).
Signed-off-by: AngeloGioacchino Del Regno < angelogioacchino.delregno@collabora.com>
sound/soc/mediatek/mt8188/mt8188-mt6359.c | 32 ++++++++++++++-------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/sound/soc/mediatek/mt8188/mt8188-mt6359.c b/sound/soc/mediatek/mt8188/mt8188-mt6359.c index 5b2660139421..ac69c23e0da1 100644 --- a/sound/soc/mediatek/mt8188/mt8188-mt6359.c +++ b/sound/soc/mediatek/mt8188/mt8188-mt6359.c @@ -6,6 +6,7 @@
- Author: Trevor Wu trevor.wu@mediatek.com
*/
+#include <linux/bitfield.h> #include <linux/input.h> #include <linux/module.h> #include <linux/of_device.h> @@ -19,6 +20,15 @@ #include "../common/mtk-afe-platform-driver.h" #include "../common/mtk-soundcard-driver.h"
+#define CKSYS_AUD_TOP_CFG 0x032c
- #define RG_TEST_ON BIT(0)
- #define RG_TEST_TYPE BIT(2)
+#define CKSYS_AUD_TOP_MON 0x0330
- #define TEST_MISO_COUNT_1 GENMASK(3, 0)
- #define TEST_MISO_COUNT_2 GENMASK(7, 4)
- #define TEST_MISO_DONE_1 BIT(28)
- #define TEST_MISO_DONE_2 BIT(29)
#define NAU8825_HS_PRESENT BIT(0)
/* @@ -251,9 +261,6 @@ static const struct snd_kcontrol_new mt8188_nau8825_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), };
-#define CKSYS_AUD_TOP_CFG 0x032c -#define CKSYS_AUD_TOP_MON 0x0330
static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_component *cmpnt_afe = @@ -265,13 +272,13 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) struct mtkaif_param *param; int chosen_phase_1, chosen_phase_2; int prev_cycle_1, prev_cycle_2;
- int test_done_1, test_done_2;
- u8 test_done_1, test_done_2; int cycle_1, cycle_2; int mtkaif_chosen_phase[MT8188_MTKAIF_MISO_NUM]; int mtkaif_phase_cycle[MT8188_MTKAIF_MISO_NUM]; int mtkaif_calibration_num_phase; bool mtkaif_calibration_ok;
- unsigned int monitor = 0;
- u32 monitor = 0; int counter; int phase; int i;
@@ -303,8 +310,7 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) mt6359_mtkaif_calibration_enable(cmpnt_codec);
/* set test type to synchronizer pulse */
- regmap_update_bits(afe_priv->topckgen,
CKSYS_AUD_TOP_CFG, 0xffff, 0x4);
- regmap_write(afe_priv->topckgen, CKSYS_AUD_TOP_CFG,
RG_TEST_TYPE);
Hi Angelo,
Because CKSYS_AUD_TOP_CFG is a 32bit register, it should be better to use regmap_set_bits instead.
regmap_set_bits(afe_priv->topckgen, CKSYS_AUD_TOP_CFG, RG_TEST_TYPE);
Thanks, Trevor
mtkaif_calibration_num_phase = 42; /* mt6359: 0 ~ 42 */ mtkaif_calibration_ok = true;
@@ -314,7 +320,7 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) mt6359_set_mtkaif_calibration_phase(cmpnt_codec, phase, phase, phase);
regmap_set_bits(afe_priv->topckgen, CKSYS_AUD_TOP_CFG,0x1);
regmap_set_bits(afe_priv->topckgen, CKSYS_AUD_TOP_CFG,RG_TEST_ON);
test_done_1 = 0; test_done_2 = 0;@@ -326,14 +332,14 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) while (!(test_done_1 & test_done_2)) { regmap_read(afe_priv->topckgen, CKSYS_AUD_TOP_MON, &monitor);
test_done_1 = (monitor >> 28) & 0x1;test_done_2 = (monitor >> 29) & 0x1;
test_done_1 = FIELD_GET(TEST_MISO_DONE_1,monitor);
test_done_2 = FIELD_GET(TEST_MISO_DONE_2,monitor);
if (test_done_1 == 1)
cycle_1 = monitor & 0xf;
cycle_1 = FIELD_GET(TEST_MISO_COUNT_1,monitor);
if (test_done_2 == 1)
cycle_2 = (monitor >> 4) & 0xf;
cycle_2 = FIELD_GET(TEST_MISO_COUNT_2,monitor);
/* handle if never test done */ if (++counter > 10000) {@@ -361,7 +367,7 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) mtkaif_phase_cycle[MT8188_MTKAIF_MISO_1] = prev_cycle_2; }
regmap_clear_bits(afe_priv->topckgen,CKSYS_AUD_TOP_CFG, 0x1);
regmap_clear_bits(afe_priv->topckgen,CKSYS_AUD_TOP_CFG, RG_TEST_ON);
if (mtkaif_chosen_phase[MT8188_MTKAIF_MISO_0] >= 0 && mtkaif_chosen_phase[MT8188_MTKAIF_MISO_1] >= 0)-- 2.40.1