This patch supports some type of machine drivers that set 0 to mclk when sound device goes to idle state. After applied this patch, sysclk == 0 means there is no constraint of sound rate and other values will set constraints which is derived by sysclk setting.
Original code refuses sysclk == 0 setting. But some boards and SoC (such as RockPro64 and RockChip I2S) has connected SoC MCLK out to ES8316 MCLK in. In this case, SoC side I2S will choose suitable frequency of MCLK such as fs * mclk-fs when user starts playing or capturing.
Bad scenario as follows (mclk-fs = 256): - Initialize sysclk by correct value (Ex. 12.288MHz) - ES8316 set constraints of PCM rate by sysclk 48kHz (1/256), 32kHz (1/384), 30.720kHz (1/400), 24kHz (1/512), 16kHz (1/768), 12kHz (1/1024) - Play 48kHz sound, it's acceptable - Sysclk is not changed
- Play 32kHz sound, it's acceptable - Set sysclk by 8.192MHz (= fs * mclk-fs = 32k * 256) - ES8316 set constraints of PCM rate by sysclk 32kHz (1/256), 21.33kHz (1/384), 20.48kHz (1/400), 16kHz (1/512), 10.66kHz (1/768), 8kHz (1/1024)
- Play 48kHz again, but it's NOT acceptable because constraints list does not allow 48kHz
Signed-off-by: Katsuhiro Suzuki katsuhiro@katsuster.net --- sound/soc/codecs/es8316.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-)
diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index 1424ecd6952c..36eef1fb3d18 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -370,8 +370,12 @@ static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai,
es8316->sysclk = freq;
- if (freq == 0) + if (freq == 0) { + es8316->sysclk_constraints.list = NULL; + es8316->sysclk_constraints.count = 0; + return 0; + }
ret = clk_set_rate(es8316->mclk, freq); if (ret) @@ -450,17 +454,10 @@ static int es8316_pcm_startup(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component);
- if (es8316->sysclk == 0) { - dev_err(component->dev, "No sysclk provided\n"); - return -EINVAL; - } - - /* The set of sample rates that can be supported depends on the - * MCLK supplied to the CODEC. - */ - snd_pcm_hw_constraint_list(substream->runtime, 0, - SNDRV_PCM_HW_PARAM_RATE, - &es8316->sysclk_constraints); + if (es8316->sysclk_constraints.list) + snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &es8316->sysclk_constraints);
return 0; } @@ -472,11 +469,19 @@ static int es8316_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); u8 wordlen = 0; + int i;
- if (!es8316->sysclk) { - dev_err(component->dev, "No MCLK configured\n"); - return -EINVAL; + /* Validate supported sample rates that are autodetected from MCLK */ + for (i = 0; i < NR_SUPPORTED_MCLK_LRCK_RATIOS; i++) { + const unsigned int ratio = supported_mclk_lrck_ratios[i]; + + if (es8316->sysclk % ratio != 0) + continue; + if (es8316->sysclk / ratio == params_rate(params)) + break; } + if (i == NR_SUPPORTED_MCLK_LRCK_RATIOS) + return -EINVAL;
switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: