[alsa-devel] Right place for defining ACPI GPIO mapping for codec

6 Jan 2020


      Hello,
I am working now to get sound working at Lenovo Yoga Book tablet. It is
Intel CherryTrail-based device and has RT5677 sound codec.
The RT5677 codec driver uses two GPIOs to reset and enable the codec,
with names 'realtek,reset' and 'realtek,pow-ldo2'. The ACPI definition lacks a
 _DSD section with GPIO name->CRS ID definition, so I need to manually
define this mapping somewhere using existing
devm_acpi_dev_add_driver_gpios() method (various devices has various _CRS
 definitions order and content, so this is cannot be placed into
rt5677.c codec driver).
The most obvious place for this is ASoC machine driver for my device, but the
codec driver is binded to the ACPI device and initializes before machine
driver.
Can somebody advice how to define such GPIOs mapping for codec in my
case?
The ACPI definition of sound device is below. Second I2C address
definition is for TS3A277E jack detector. The first GPIO in the _CRS is
codec reset, the second is pow-ldo2.
Device (RTEK)
{
    Name (_ADR, Zero)  // _ADR: Address
    Name (_HID, "10EC5677")  // _HID: Hardware ID
    Name (_CID, "10EC5677")  // _CID: Compatible ID
    Name (_DDN, "Realtek IIS Audio Codec")  // _DDN: DOS Device Name
    Name (_SUB, "17AA7005")  // _SUB: Subsystem ID
    Name (_UID, One)  // _UID: Unique ID
    Name (_PR0, Package (0x01)  // _PR0: Power Resources for D0
    {
        CLK3
    })
    Name (CHAN, Package (0x02)
    {
        One, 
        0x0124F800
    })
    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
    {
        Name (SBUF, ResourceTemplate ()
        {
            I2cSerialBusV2 (0x002C, ControllerInitiated, 0x000186A0,
                AddressingMode7Bit, "\_SB.PCI0.I2C1",
                0x00, ResourceConsumer, , Exclusive,
                )
            I2cSerialBusV2 (0x003B, ControllerInitiated, 0x000186A0,
                AddressingMode7Bit, "\_SB.PCI0.I2C1",
                0x00, ResourceConsumer, , Exclusive,
                )
            GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                "\_SB.GPO3", 0x00, ResourceConsumer, ,
                )
                {   // Pin list
                    0x0019
                }
            GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                "\_SB.GPO3", 0x00, ResourceConsumer, ,
                )
                {   // Pin list
                    0x0012
                }
            GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                "\_SB.GPO3", 0x00, ResourceConsumer, ,
                )
                {   // Pin list
                    0x0030
                }
            GpioInt (Edge, ActiveLow, Exclusive, PullNone, 0x0000,
                "\_SB.GPO0", 0x00, ResourceConsumer, ,
                )
                {   // Pin list
                    0x005B
                }
            GpioInt (Edge, ActiveLow, Exclusive, PullNone, 0x0000,
                "\_SB.GPO0", 0x00, ResourceConsumer, ,
                )
                {   // Pin list
                    0x004D
                }
            SpiSerialBusV2 (0x0001, PolarityLow, FourWireMode, 0x08,
                ControllerInitiated, 0x003D0900, ClockPolarityHigh,
                ClockPhaseSecond, "\_SB.PCI0.SPI1",
                0x00, ResourceConsumer, , Exclusive,
                )
        })
        Return (SBUF) /* _SB_.PCI0.I2C1.RTEK._CRS.SBUF */
    }
Method (_STA, 0, NotSerialized)  // _STA: Status
    {
        Return (0x0F)
    }
Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
    {
    }
}
-- 
Yauhen Kharuzhy