3 Sep
2021
3 Sep
'21
10:18 a.m.
On Fri, Sep 3, 2021 at 4:51 AM Alejandro atafalla@dnyon.com wrote:
From: Alejandro Tafalla atafalla@dnyon.com
Drive the reset gpio if defined in the DTS node.
...
reset_gpio= devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW);if (IS_ERR(reset_gpio)) {ret = PTR_ERR(reset_gpio);return dev_err_probe(&i2c->dev, ret, "failed to request GPIO reset pin");
Not sure why my comments have been ignored here.
}
-- With Best Regards, Andy Shevchenko