Once when it's confirmed to work from user-space, we can think of the kernel-side implementation, too. Instead of setting up the whole complex i2c subsystem, we may wire up the existing stuff in sound/i2c/*, too.
Okay
You should try to initialize over i2c over HD-audio GPIO pins using a
user-space program at first. The GPIO pins can be read/written via hda-verb as I already mentioned, hence you can access to i2c bus from the user-space directly.
I have written the following bash script,
#!/bin/bash # DIR 0 (low) = out 40 (high) = in # low to write, high to read # SCL == 0x40 SDA == 0x80 function send() { str1=$1 str2=$2 str3=$3 hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_MASK 0x$str1 # we send 0 to bus by enabling gpio_dir hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DIR 0x$str2 # we send data=0 to send to the bus hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DATA 0x$str3 } # reads the values I set, no different return value from i2c/codec function recv() { hda-verb /dev/snd/hwC0D0 0x01 GET_GPIO_MASK 0x$str1 hda-verb /dev/snd/hwC0D0 0x01 GET_GPIO_DIR 0x$str2 hda-verb /dev/snd/hwC0D0 0x01 GET_GPIO_DATA 0x$str3 }
function send_sequence() { data=$1 #split hexes by coma to be able to send 1 by 1 hexes=$(echo $data|tr "," "\n") for hex in $hexes; do echo 'sending hex: ' $hex send 40 0 0 # 0 to scl
mask of SCL enabled, data 0 , dir 0, is that correct ?
sleep 0.003 send 80 0 $hex # send 0x28 to sda if $hex=28
mask of SDA enabled, direction 0, hex to data
sleep 0.003 send 0 40 40 # 1 to scl
mask of SCL disabled, direction 1, data 1
sleep 0.003 echo sent done}
below i'm sending the hexes from Win10ini but in the exact same order, which worries me a bit, maybe they need to be reversed 4by4? like 01,90,02,00,11,01,02 could become: 00,02,90,01,02,01,11 .. because for the InitVerbs i did that reversing 4by4 and it works only correctly if the hexes are reversed 4by4. (at the end of the email i am attaching the exitverbs conversion which is perfect).
#initi2c send_sequence "01,90,3a,00,10,10,b0,00,1d,01,00,02,06,00,11,07,01,00,10,09,02,07,03,00,12,01,00,08,13,05,ff,06,00,07,20,02,0d,00,2a,02,02,03,00,04,00,05,02,06,00,07,20,08,02,09,00,0a,80,0b,02,0c,00,0d,a0,01,0c,00,29,02,01,03,02,04,00,05,00,01,01,00,11,01,0a,02,84,00,23,01,00,03,00,02,3f,00,20,01,03,00,1b,75,b6,73,c2,00,11,29,01,21,f3,03,20,05,00,12,00,13,80,00,1c,03,c0" #streamstarti2c send_sequence "01,90,02,00,11,01,02" #powerup-amps send_sequence "04,28,2a,2c,2e,07,00,81,01,11,02,32,03,48,04,11,05,10,00,80" send_sequence "01,28,01,05,00,01,2a,01,05,02,01,2c,01,05,01,01,2e,01,05,03" #streamstopi2c send_sequence "01,90,02,00,11,01,0a" #echo read #recv 0 0 0
For example something that works is "ExitVerbs"=hex:00,05,17,00,01,00,75,04,00,00,74,04,82,00,75,04,00,00,74,04,03,\
00,75,04,00,80,74,04,04,00,75,04,01,28,74,04,06,00,75,04,00,80,74,04,07,00,\ 75,04,01,28,74,04,65,00,75,04,00,00,74,04,00,03,77,04,03,05,17,00
hda-verb /dev/snd/hwC0D0 0x01 0x705 0x00 hda-verb /dev/snd/hwC0D0 0x47 0x500 0x01 hda-verb /dev/snd/hwC0D0 0x47 0x400 0x00 hda-verb /dev/snd/hwC0D0 0x47 0x500 0x82 hda-verb /dev/snd/hwC0D0 0x47 0x400 0x00 hda-verb /dev/snd/hwC0D0 0x47 0x500 0x03 hda-verb /dev/snd/hwC0D0 0x47 0x480 0x00 hda-verb /dev/snd/hwC0D0 0x47 0x500 0x04 hda-verb /dev/snd/hwC0D0 0x47 0x428 0x01 hda-verb /dev/snd/hwC0D0 0x47 0x500 0x06 hda-verb /dev/snd/hwC0D0 0x47 0x480 0x00 hda-verb /dev/snd/hwC0D0 0x47 0x500 0x07 hda-verb /dev/snd/hwC0D0 0x47 0x428 0x01 hda-verb /dev/snd/hwC0D0 0x47 0x500 0x65 hda-verb /dev/snd/hwC0D0 0x47 0x400 0x00 hda-verb /dev/snd/hwC0D0 0x47 0x703 0x00 hda-verb /dev/snd/hwC0D0 0x01 0x705 0x03
Also InitVerbs from windows10ini and ExitVerbs from windows10ini reversed
hexes 4by4 sent with hda-verb work perfect. They initiate the CS8409 codec or shut it down properly as i can see in the codec#0 status changing from D3 to D0 and D0 to D3. But the above exitverbs are sent to the widgets AFG node and the 0x47 widget, (InitVerbs have a few more widgets).
I tried to do the same for the InitI2C hexes, but apperently they are not supposed to be send as hexes directly to the widgets like InitVerbs or ExitVerbs. All the I2C related stuff are strictly I2C related for executing on the SDA/SCL GPIO7/6.
So my idea is, do I need to reverse the hexes 4 by 4, when sending to the SDA ? And if you have any examples how can i get a read value from the SDA please.
Btw: root@debian:~# cat /proc/asound/card0/codec#0 |head -n 25|tail -n 8 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 the default values are IO7 which is GPIO7 which is SDA. is enabled=0 dir=0 data=0
root@debian:~# hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_MASK 0x80 nid = 0x1, verb = 0x716, param = 0x80 value = 0x0 root@debian:~# hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DIR 0x0 nid = 0x1, verb = 0x717, param = 0x0 value = 0x0 root@debian:~# hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DATA 0x28 nid = 0x1, verb = 0x715, param = 0x28 value = 0x0 After i send the above, data becomes data=1 but i sent 0x28.
root@debian:~# cat /proc/asound/card0/codec#0 |head -n 25|tail -n 8 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[7]: enable=1, dir=0, wake=0, sticky=0, data=1, unsol=0
But if i read GPIO_DATA, root@debian:~# hda-verb /dev/snd/hwC0D0 0x01 GET_GPIO_DATA 0x0 nid = 0x1, verb = 0xf15, param = 0x0 value = 0x80
the value returned is 0x80. Which leads me to the idea the only type of data you can send is either 0x40 for 1 on SCL, 0x80 for 1 on SDA, or 0x00 for 0 on both( if you enable mask of SCL it will send 0 to SCL only, and if you enable mask of SDA it will send 0 to SDA only).
If thats true, you can only send 0/1 to the GPIOs, which means if i have to send the address of 1st SSM3515 "0x28", I have to send it as "101000" to the SDA.
How could I try to read register 0x00 of I2C address 0x28 (one of the four SSM3515 amplifier) ? It should return value 0x83 according to the documentation of SSM3515 as a "reset value for register 0x00".
If it is true that I can read data with GET_GPIO_DATA will it return as well only one bit of data like 0/1 at a time? If I need get a value of 0x83 thru the GPIO7 its binary value should be 10000011 , so this means that If i execute GET_GPIO_DATA 8 times in a row i will receive this piece by piece 1, 0 , 0 , 0 , 0 , 0 , 1, 1. Meanwhile I try to execute 8 times GET_GPIO_DATA should i be sending to the SCL (GPIO6) each time a clock value 0 ? or also a SET_GPIO_DATA value to the GPIO7 with value 0 for reading? Please advise.