On 22/02/2022 19:26, Pierre-Louis Bossart wrote:
+static irqreturn_t qcom_swrm_wake_irq_handler(int irq, void *dev_id) +{
- struct qcom_swrm_ctrl *swrm = dev_id;
- int ret = IRQ_HANDLED;
- struct sdw_slave *slave;
- clk_prepare_enable(swrm->hclk);
- if (swrm->wake_irq > 0) {
if (!irqd_irq_disabled(irq_get_irq_data(swrm->wake_irq)))disable_irq_nosync(swrm->wake_irq);- }
- /*
* resume all the slaves which must have potentially generated this* interrupt, this should also wake the controller at the same time.* this is much safer than waking controller directly that will deadlock!*/There should be no difference if you first resume the controller and then attached peripherals, or do a loop where you rely on the pm_runtime framework.
The notion that there might be a dead-lock is surprising, you would need to elaborate here.Issue is, if wakeup interrupt resumes the controller first which can
trigger an slave pending interrupt (ex: Button press event) in the middle of resume that will try to wake the slave device which in turn will try to wake parent in the middle of resume resulting in a dead lock.
This was the best way to avoid dead lock.
- list_for_each_entry(slave, &swrm->bus.slaves, node) {
ret = pm_runtime_get_sync(&slave->dev);In my experience, you don't want to blur layers and take references on the child devices from the parent device. I don't know how many times we end-up with weird behavior.
we've done something similar on the Intel side but implemented in a less directive manner.
thanks, I can take some inspiration from that.
--srini
ret = device_for_each_child(bus->dev, NULL, intel_resume_child_device);
static int intel_resume_child_device(struct device *dev, void *data) { [...] ret = pm_request_resume(dev); if (ret < 0) dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret);
return ret; }
if (ret < 0 && ret != -EACCES) {dev_err_ratelimited(swrm->dev,"pm_runtime_get_sync failed in %s, ret %d\n",__func__, ret);pm_runtime_put_noidle(&slave->dev);ret = IRQ_NONE;goto err;}- }
- list_for_each_entry(slave, &swrm->bus.slaves, node) {
pm_runtime_mark_last_busy(&slave->dev);pm_runtime_put_autosuspend(&slave->dev);- }
+err:
- clk_disable_unprepare(swrm->hclk);
- return IRQ_HANDLED;
+}